About This Archive  | DCHAS-L 2022 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: [DCHAS-L] Pressurization of 5 gallon glass carboy
Date: Thursday, February 24, 2022 at 11:14:44 AM
Author: Ralph Stuart <Ralph.Stuart**At_Symbol_Here**keene.edu> 		Next by Date:
Subject: Re: [DCHAS-L] Pressurization of 5 gallon glass carboy
Date: Thu, 24 Feb 2022 16:43:18 +0000
Author: "Chantal, Pierre (HC/SC)"

From: Tammy M. Lutz-Rechtin <tlutzrec**At_Symbol_Here**UARK.EDU>
Subject: Re: [DCHAS-L] Pressurization of 5 gallon glass carboy
Date: Thu, 24 Feb 2022 16:38:04 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: SA0PR04MB744906C5D05CB25656ECE3EDBA3D9**At_Symbol_Here**SA0PR04MB7449.namprd04.prod.outlook.com
In-Reply-To <678199F8-23D6-4C1D-92D8-D908C88A8B7B**At_Symbol_Here**keene.edu>


It is hard to comment with specifics because of the big unknowns in the description "gas demonstrations."  Firstly,  the integrity of the new glass vessels could be affected by the etching. The real pressure it can handle will depend on the temperature of the demonstration and wall thickness.  Larger vessels tend to have lower ratings unless the thickness is substantially increased.  If the demonstrator is worried about pressure, then I suggest three things (1) hydrostatic testing before use (2) don't use it over 25 psi max. and (3) add a sized pressure relief device to prevent over-pressurization. 

Tammy Rechtin, Ph.D.
Chemical Engineering Safety Coordinator
Ralph E. Martin, Department of Chemical Engineering
University of Arkansas


From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> on behalf of Ralph Stuart <ralph.stuart**At_Symbol_Here**KEENE.EDU>
Sent: Thursday, February 24, 2022 10:14 AM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Subject: [DCHAS-L] Pressurization of 5 gallon glass carboy
 
One of our faculty member was doing due diligence inspections on inherited equipment he uses in the physical chemistry lab for gas demonstrations. He found some defects in glass 5 gallon carboys, so ordered replacements. They arrived from DWK-Kimble with precautions etched on the outside, including "Do not evacuate or pressurize unless recommended in the current DWK Kimble catalog." Unfortunately, the catalog does not contain any information about pressurizing or evacuating the carboys. It simply says that the carboys are "Ideal for storage and dispensing of solutions."

There are no discernible design differences between the new carboys and the older ones. I wonder if anyone on the list has experience with assessing the risk associated with gas pressure differences with this equipment?

Thanks for any information on this.

- Ralph


Ralph Stuart, CIH, CCHO
Environmental Safety Manager
Keene State College
603 358-2859

ralph.stuart**At_Symbol_Here**keene.edu

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.