Ralph,
I meant the detection instrument.
Regards,
Ed
-----Original Message----- > >I learned from discussion with two fume hood testing professionals that the major SF6 measuring instrument is no longer being manufactured or no longer being supported, and certified testers are in a holding pattern and waiting for the new standard and the potentially new equipment requirements that could go with a change in tracer gas. - Ralph Ralph Stuart, CIH, CCHO --- ---
Previous post | Top of Page | Next post
From: ACS Division of Chemical Health and Safety
Sent: Friday, November 12, 2021 9:45 AM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: Re: [DCHAS-L] SF6 fume hood certification
>
Is this the SF6 detector or the orifice used to release the SF6 in the hood? I know that the latter was a speciality item for this test and hard to acquire, unless you made your own...
ralph**At_Symbol_Here**rstuartcih.org
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas