On Feb 10, 2021, at 10:02 AM, Harry J. Elston <harry**At_Symbol_Here**midwestchemsafety.com> wrote:
=EF=BB=BFStephen,Just because you can do something, doesn't mean you should. Perchloric acid hoods are typical stainless steel and nozzles for the washdown system are typically brass or bronze (though I've seen some plastic ones in newer systems). Converting the hood to "general use" typically involves using hydrochloric acid, which will chew up the stainless steel and bronze/brass nozzles pretty quickly. Hot acid vapors will also chew up any brass/bronze in the hood. (Also know that hot acid vapors will chew up galvanized ductwork and metal fan blades too.)If you can restrict the hood to non-acid use, you can get the ductwork cleaned out and use it.Standard warnings and cautions apply with respect to perchlorates in the hood when performing maintenance or conversion.HarryOn Wed, Feb 10, 2021 at 11:02 AM Stephen Beaton <Steve.Beaton**At_Symbol_Here**dal.ca> wrote:--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchasHello all,
Can a perchloric acid hood be repurposed as a standard fume hood for typical chemistry reactions? Are there any limitations?
There are some older perchloric acid hoods, but the wash down cycle is no longer functional (perchlorates have been addressed). There is no anticipated work with perchloric acid. The exhaust fan is still operational, and can draw an appropriate face velocity.
Thoughts?
Thank you.
Stephen Beaton, MSc, CHO, CRSP
Chemical Safety Manager
Environmental Health and Safety Office
902.494.1934 | steve.beaton**At_Symbol_Here**dal.ca
Dalhousie University
----- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas++++++Harry J. Elston, Ph.D., CIH, PMPPrincipal, Midwest Chemical Safety, LLC
Previous post | Top of Page | Next post