From: Dr Bob <drbob**At_Symbol_Here**FLOWSCIENCES.COM>
Subject: Re: [DCHAS-L] Repurpose Perchloric Acid Hood
Date: Wed, 10 Feb 2021 18:37:22 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: BN8PR07MB634089F43C303A83FECE03D7D98D9**At_Symbol_Here**BN8PR07MB6340.namprd07.prod.outlook.com
In-Reply-To


Hi All!

 

I agree with Harry that HCl will kill a perchloric hood if used in large quantities.

 

For a lot of reasons, I would never repurpose such a hood!

 

See link below from the Flow Sciences web page:

 

https://flowsciences.com/perchloric-acid-fume-hoods/

 

There's also video post of hood and its performance on the FSI linkedin site:

 

Dr. Bob Haugen

Director of Product and Technology Development

Flow Sciences, Inc.

 

910 332 4878

 

www.flowsciences.com
 Linkedin  - FacebookYoutube - Twitter

Customer Satisfaction Survey

 

CONFIDENTIALITY NOTE: This e-mail, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of this transmission may also be subject to intellectual property rights and all such rights are expressly claimed and are not waived. The contents of this e-mail do not necessarily represent the views or policies of Flow Sciences Inc. or its employees.

 

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Harry J. Elston
Sent: Wednesday, February 10, 2021 12:21 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: Re: [DCHAS-L] Repurpose Perchloric Acid Hood

 

Stephen,

 

Just because you can do something, doesn't mean you should.  Perchloric acid hoods are typical stainless steel and nozzles for the washdown system are typically brass or bronze (though I've seen some plastic ones in newer systems).  Converting the hood to "general use" typically involves using hydrochloric acid, which will chew up the stainless steel and bronze/brass nozzles pretty quickly.  Hot acid vapors will also chew up any brass/bronze in the hood.   (Also know that hot acid vapors will chew up galvanized ductwork and metal fan blades too.)

 

If you can restrict the hood to non-acid use, you can get the ductwork cleaned out and use it.  

 

Standard warnings and cautions apply with respect to perchlorates in the hood when performing maintenance or conversion.

 

Harry

 

On Wed, Feb 10, 2021 at 11:02 AM Stephen Beaton <Steve.Beaton**At_Symbol_Here**dal.ca> wrote:

Hello all, 

 

Can a perchloric acid hood be repurposed as a standard fume hood for typical chemistry reactions? Are there any limitations?

 

There are some older perchloric acid hoods, but the wash down cycle is no longer functional (perchlorates have been addressed). There is no anticipated work with perchloric acid. The exhaust fan is still operational, and can draw an appropriate face velocity.

 

Thoughts?

Thank you.

 

Stephen Beaton, MSc, CHO, CRSP
Chemical Safety Manager

Environmental Health and Safety Office
902.494.1934 | steve.beaton**At_Symbol_Here**dal.ca
Dalhousie University

dal.ca/safety

 

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas


 

--

++++++

Harry J. Elston, Ph.D., CIH, PMP

Principal, Midwest Chemical Safety, LLC

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.