Hi All!
Here’s a link to a review of common fume hood ventilation issues:
https://flowsciences.com/common-fume-hood-containment-problems/
There are, obviously numerous new misapplications being discovered every day!
Dr. Bob Haugen
Director of Product and Technology Development
Flow Sciences, Inc.
910 332 4878
Containment Products •
Get a Quote/Consultation •
Get Support/Replacement Parts
CONFIDENTIALITY NOTE: This e-mail, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient,
and may not otherwise be distributed, copied or disclosed. The contents of this transmission may also be subject to intellectual property rights and all such rights are expressly claimed and are not waived. The contents of this e-mail do not necessarily represent
the views or policies of Flow Sciences Inc. or its employees.
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU]
On Behalf Of Yaritza Brinker
Sent: Monday, December 2, 2019 2:13 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] Ventilation issues stacking lab
Whatever you do…. Do not put the air intake near the hood exhaust. Nor downwind from it. Nor near the shipping dock.
Years passed under the presumption we had shared ventilation systems, until one day we had a long chat with our HVAC repair guy. Turns out the labs had dedicated ventilation
systems… except they put the intake and exhaust vents practically next to each other, and right above where trucks would idle.
The trucks idling was an easy fix. The other… not so much.
Which goes back to Peter’s comment... get yourself a good ventilation engineer.
Thank you,
Yaritza Brinker
260.827.5402
From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON..EDU>
On Behalf Of Peter Zavon
Sent: Thursday, November 28, 2019 11:22 AM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] Ventilation issues stacking lab
** External Email **
It sounds like you are adding chemistry labs and their ventilation to a building that already contains biology labs and their ventilation. Biology labs may not
have been given quite as robust a ventilation system as chemistry labs would need. Adding on may require substantial upgrades to the exhaust equipment, reassessment of the system’s exhaust points and stack height, and will certainly require careful design
by a ventilation engineer who has knowledge of and prior experience with laboratory ventilation. Do not leave it to the architect, or to just any design engineer.
The only issue I can see with stacking both floors on the same system is the need to ensure against backflow where effluent air from one department might be transported
into the other department..
Peter Zavon, CIH
Penfield, NY
PZAVON**At_Symbol_Here**Rochester.rr.com
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU]
On Behalf Of Alino, Vera
Sent: Wednesday, November 27, 2019 10:52 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] Ventilation issues stacking lab
Hi all,
Does anyone know if there are any safety issues/concerns that need to be addressed when sharing a ventilation system of the labs on the first and second floor? We are in the designing
stage of building chemistry labs on the first floor and sharing the ventilation system with the biology labs on the second floor.
Any input is greatly appreciated. Thank you,
Vera Alino
Chemistry Department
Cosumnes River College
Sacramento, CA
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at
membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
Electronic Transmission Confidentiality Notice
The information contained in this electronic transmission is private, confidential, the property of
the sender, and intended for the use of the recipient(s),
only. If you are not the addressee, any disclosure, copying, distribution or use of this information for any purpose is strictly
prohibited. If you have received this information in error, please notify the sender,
YBrinker**At_Symbol_Here**fele.com,
immediately by e-mail and then delete this message. Thank you.
[FE.EN.1]
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at
membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
Previous post | Top of Page | Next post