From: Monona Rossol <0000030664c37427-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] How to "Spruce Up" or Refinish Lab Stone Benchtops?
Date: Mon, 15 Apr 2019 19:48:50 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 147668290.1050543.1555357730015**At_Symbol_Here**mail.yahoo.com
In-Reply-To


It it is in a university, tap somebody in the Geology department to determine if it is 


1)  real stone, 
2)  a manufactured stone using an inorganic binder like cement, or 
3)  a manufactured stone with an organic binder like asphalt or a polymer.

When you know, I'll have some advice.

Monona




-----Original Message-----
From: Margaret Rakas <mrakas**At_Symbol_Here**SMITH.EDU>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Sent: Mon, Apr 15, 2019 3:08 pm
Subject: [DCHAS-L] How to "Spruce Up" or Refinish Lab Stone Benchtops?

Good afternoon-

If you have been involved in lab renovations where bench tops were to be re-used and 'spruced up' a bit perhaps you can provide some guidance about some we have that appear to have suffered perhaps heat damage as well as chemical stains.  They belong to a lab used by a faculty member of 35+ years' tenure; we aren't sure whether to totally resurface them, would it help to sand the tops down, etc.  These counters are likely original to the building (mid-1960's), and were originally a charcoal-ish black....  

They have been tested for asbestos and do not contain it; counters have been confirmed to be stone, with 25% wollastonite so perhaps are some sort of manufactured stone?  

All horizontal surfaces will be cleaned professionally for chemical/biological residue by a national company specializing in these services before any construction workers enter; contractors will follow OSHA and state construction safety requirements.  We are aware there may be 'surprises' uncovered during construction (whether these are refinished or not) and will test accordingly...

If photos would help, I'm more than happy to provide them if you send me your email...

Many thanks to everyone-
Margaret
--
Margaret A. Rakas, Ph.D.
Lab Safety & Compliance Director
Clark Science Center
413-585-3877 (p)

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.