From: Kim Gates <kim.gates**At_Symbol_Here**STONYBROOK.EDU>
Subject: Re: [DCHAS-L] GHS labelling of kit components
Date: May 8, 2013 2:41:06 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <5564F9EDC11C09468EE5DAF02B5CB30F396D62CC**At_Symbol_Here**BY2PRD0410MB376.namprd04.prod.outlook.com>


Each individual container in the test kit needs to be labeled with the new requirements.


Kim Gates
Laboratory Safety Specialist
Environmental Health & Safety
Stony Brook University
Stony Brook, NY 11794-6200
Kim.Gates**At_Symbol_Here**stonybrook.edu
631-632-3032
FAX: 631-632-9683
EH&S Web site: http://www.stonybrook.edu/ehs/lab/

Please note my name and email have changed.


On Wed, May 8, 2013 at 12:53 PM, Ralph B.. Stuart <rstuart**At_Symbol_Here**cornell.edu> wrote:
I did a GHS training for a lab audience today and someone asked whether the GHS requirements will apply to the components of test kits. They said that the safety documentation with these kits tends to be skimpy and that it would be helpful to have GHS pictograms on the components. I hadn't thought about this question before and was wondering if people on DCHAS-L have experience with answering it.

Thanks for any help with this.

- Ralph


Ralph Stuart CIH
Chemical Hygiene Officer
Department of Environmental Health and Safety
Cornell University

rstuart**At_Symbol_Here**cornell.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.