About This Archive  | DCHAS-L 2011 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: Isovaleryl chloride odor control
Date: Wed, 7 Dec 2011 13:13:04 +0000
Author: Ralph B Stuart 		Next by Date:
Subject: Re: Isovaleryl chloride odor control
Date: Wed, 7 Dec 2011 08:36:02 -0600
Author: "CHANDRA, Tilak"


Date: Wed, 7 Dec 2011 09:15:26 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sender: DCHAS-L Discussion List <dchas-l**At_Symbol_Here**med.cornell.edu>
From: ILPI <info**At_Symbol_Here**ILPI.COM>
Subject: Re: Isovaleryl chloride odor control
X-To: DCHAS-L
In-Reply-To: <1B4D1665F78352429F7714A6540EB0360769C853**At_Symbol_Here**MBXE-01.exchange.cornell.edu>

That will hydrolyze to the corresponding carboxylic acid, isovaleric acid = 3-methylbutyric acid.  


 I have no experience with the material, but I imagine that it is similar to  butyric acid in its odor characteristics and staying power.   Butyric acid has such a low odor threshold and strong odor response that one could screw the cap off the bottle in a large room, cap it again, and the room would reek for some time.  I had a friend who handled the stuff with gloves and a syringe.  He claims it didn't spill, but when he was done his hand reeked of butyric acid.  It took numerous hand washings with various attempted neutralization agents over several hours for him to get it off.  After each try his hands would smell clean, but after a minute or so the stuff would work its way out of his skin and start reeking again.

I suspect that what happened is that a tiny amount of this material dripped or absorbed somewhere outside - on the bench, the floor, a lab coat, the sharps disposal box, on the used gloves in the trashcan, etc. in which case it could linger for days and days.  The solution would be to chemically neutralize it or throw away the contaminated waste/equipment.

Rob Toreki

  ======================================================
Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust.  Visit us at http://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012

On Dec 7, 2011, at 8:13 AM, Ralph B Stuart wrote:

I'm investigating a situation in which someone was working with isovaleryl chloride which led to an odor release that lasted for a week. After the material was extracted from the stock container with a syringe in a hood, it was used in a Schlenk line outside the hood. Preliminary examination of the hood with dry ice indicates that it's maintaining containment. The lab's general ventilation rate is high, as there are 10 feet of hood space in 700 square feet of floor space.

I wonder if anyone has experience with a similar situation that could help explain there the odor came from and why lasted so long?

Thanks for any information about this.

- Ralph

Ralph Stuart CIH
Laboratory Ventilation Specialist
Department of Environmental Health and Safety Cornell University

rstuart**At_Symbol_Here**cornell.edu


Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.