Date: Wed, 7 Dec 2011 13:13:04 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sender: DCHAS-L Discussion List <dchas-l**At_Symbol_Here**med.cornell.edu>
From: Ralph B Stuart <rstuart**At_Symbol_Here**CORNELL.EDU>
Subject: Isovaleryl chloride odor control
X-To: "dchas-l**At_Symbol_Here**med.cornell.edu"

I'm investigating a situation in which someone was working with isovaleryl chloride which led to an odor release that lasted for a week. After the material was extracted from the stock container with a syringe in a hood, it was used in a Schlenk line outside the hood. Preliminary examination of the hood with dry ice indicates that it's maintaining containment. The lab's general ventilation rate is high, as there are 10 feet of hood space in 700 square feet of floor space.

I wonder if anyone has experience with a similar situation that could help explain there the odor came from and why lasted so long?

Thanks for any information about this.

- Ralph

Ralph Stuart CIH
Laboratory Ventilation Specialist
Department of Environmental Health and Safety Cornell University

rstuart**At_Symbol_Here**cornell.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.