Date: Wed, 15 Jul 2009 22:04:18 -0400
Reply-To: Peter Zavon <pzavon**At_Symbol_Here**ROCHESTER.RR.COM>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Peter Zavon <pzavon**At_Symbol_Here**ROCHESTER.RR.COM>
Subject: Re: Air Flow Monitors for fume hoods
In-Reply-To: <ef26f8106e3d2.6e3d2ef26f810**At_Symbol_Here**cwru.edu>
I suppose the simplest flow monitor is a manometer connected as a static
pressure indicator to a straight length of exhaust duct and mounted on the
face of the hood, and calibrated once or twice per year against a face
velocity measurement.

It is always a good idea to have an air flow indicator on a chemical fume
hood in a location that can readily be seen by the hood user.  Whether it is
a legal requirement or not apparently depends on whether you are in
California. 

Peter Zavon, CIH
Penfield, NY

PZAVON**At_Symbol_Here**Rochester.rr.com 


> -----Original Message-----
> From: DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**list.uvm.edu] 
> On Behalf Of Mary Ellen A Scott
> Sent: Wednesday, July 15, 2009 4:42 PM
> To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
> Subject: [DCHAS-L] Air Flow Monitors for fume hoods
> 
> Does anyone have an inexpensive solution for adding an air 
> flow monitor to older fume hoods?  Is it now law that every 
> fume hood (old and new) have one?
> 
> Thanks
> 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.