Date: Tue, 31 Mar 2009 09:42:30 -0400
Reply-To: Chrismarlowe <Chrismarlowe**At_Symbol_Here**COMCAST.NET>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Chrismarlowe <Chrismarlowe**At_Symbol_Here**COMCAST.NET>
Subject: Re: Picric acid
Comments: To: List Moderator
In-Reply-To: <08DD8BD0-50EB-4C5B-806C-3A5C7B6B8199**At_Symbol_Here**uvm.edu>
Listers:

Lyle Phifer, Russ' father, taught me a technique for opening containers of
peroxide formers. 

- Gently place the container in a vise. 

- Tighten the vise on the container so that it that can resist the twist
described below. 

	- Placing a round container in a vise with flat jaws may require
some 
	  engineering, but you'll figure it out. 

- Wrap a string at least a dozen times around the cap in a counterclockwise
direction.

	- Kite string might be appropriate

- Extend the string to the other side of the room, or even around a doorway

- Pull on the string steadily, but firmly

- The cap will unscrew with no one near to be hurt if an explosion results. 

I have not needed this technique, but I continue to think it would work
quite well. 

Stay healthy,
 
Chris Marlowe
42 Highlander Dr
Scotch Plains, NJ  07076
908 / 754 - 5160 (home)
732 / 539 - 8128 (cell)
Krismarlowe**At_Symbol_Here**Verizon.net 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.