Date: Mon, 12 Feb 2007 10:31:06 -0500
Reply-To: Yung Morgan <pmorgan**At_Symbol_Here**EHS.UMASS.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Yung Morgan <pmorgan**At_Symbol_Here**EHS.UMASS.EDU>
Subject: Regulation for fire alarms in labs
Comments: cc: Mike Swain
Good morning Gentlemen and ladies,
 
I would like to ask you all a question. Are there any regulations when it
comes to laboratory structure (new or old structures)? Regulations or
requirements such fire alarm, fire-sprinkler heads, smoke detectors, etc.
 
 
Javier Medina
 
 
 
 
Hi Javier,
 
This is from our fire prevention officer Mike Swain. Good luck YM
 
There is no easy answer for this. It depends on the location of the labs
(city and State). New structures would be controlled by the local and state
fire codes. It would be the same for existing buildings depending on what
codes apply to that community or location. Mike
 
 
 
Yung Morgan, MsPH
Chemical Safety 
Industrial Hygiene Services
Environmental Health and Safety
117 Draper hall 
UMASS,Amherst MA 01003
phone (413)  545-2682
Fax  (413) 545-2600
email : pmorgan**At_Symbol_Here**ehs.umass.edu
 
 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.