From: Ralph Stuart <Ralph.Stuart**At_Symbol_Here**keene.edu>
Subject: [DCHAS-L] Machining manganese aluminum alloys
Date: Mon, 20 Jun 2022 11:58:20 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: D7DA157E-293A-4F65-9FB9-DC183A935D15**At_Symbol_Here**keene.edu


I have a colleague who works with metallurgy researchers who develop experimental manganese-aluminum alloys for which there is minimal hazard, particularly toxicological, information. These alloys are machined into various shapes on mills. He is interested in developing a best practices document for this work, focusing on how to maintain good housekeeping practices, researching hazards associated with novel alloys, and engineering controls appropriate to this work.

I wonder if anyone knows of a good reference for this kind of work?

Thanks for any help with this inquiry.

- Ralph


Ralph Stuart, CIH, CCHO
Environmental Safety Manager
Keene State College
603 358-2859

ralph.stuart**At_Symbol_Here**keene.edu

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.