From: Info <info**At_Symbol_Here**ilpi.com>
Subject: [DCHAS-L] Ethanol sensor?
Date: Tue, 14 Jun 2022 11:55:41 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: 3C8379E5-3E59-4AC6-8CB9-C42C9B0DF520**At_Symbol_Here**ilpi.com


I have a colleague who does building alarm/detection/security systems and they are outfitting a new distillery warehouse.

Their customer's older warehouse has a VESDA system that uses an ethanol sensor made by Xtralis, but Xtralis has apparently discontinued that sensor.

Does anyone know of any source for an ethanol-specific sensor for continuous air monitoring?

Thanks,

Rob Toreki


Surgical grade US-Made FDA/NIOSH N95 just 64 cents each: 
https://www.safetyemporium.com/11192
NIOSH-approved N99 and N95 for $1 or less: https://www.safetyemporium.com/covid/

Safety Emporium
 - Laboratory and Safety Supplies 
https://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.