From: Jeffrey Lewin <jclewin**At_Symbol_Here**MTU.EDU>
Subject: Re: [DCHAS-L] Disposing of kanamycin
Date: Fri, 10 Jun 2022 15:42:17 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: CAEwQnqj1XYZtTsyppvC3XE1_PQuo3VVLAT9tcBfZC6Cn1SSv6Q**At_Symbol_Here**mail.gmail.com
In-Reply-To


Jennifer,

One of the first steps is to ask the person who manages waste water at your institution to contact your Publicly Owned Treatment Works (POTW) aka your waste water plant to see if they will accept the waste as is.

If not, it becomes a bit more challenging. Simplest is to collect it and dispose of it as a nonRCRA (i.e. not a listed or characteristic "Hazardous Waste" but a waste that is still harmful to the environment or human health). You don't say how much waste you're generating.

As for "heat inactivation" a little digging found conflicting answers. Virginia Tech has a document indicating it is heat-sensitive. The non-peer reviewed (?) Antibiotic Disposal in the Lab: Simple Tips to Get it Right has conflicting information, in one table it lists it as heat-sensitive but in a second table it states "Not destroyed by normal autoclaving/boiling. Can be autoclaved at very acidic pH. Alternatively, it must be delivered as chemical waste"

Pub Chem states: "Decomposes over a wide range above 250 =B0C. /Kanamycin sulfate/ Larranaga, M.D., Lewis, R.J. Sr., Lewis, R.A.; Hawley's Condensed Chemical Dictionary 16th Edition. John Wiley & Sons, Inc. Hoboken, NJ 2016., p. 796"

But heat-sensitive may be moot since you state: "Our concern is the very small amount of kanamycin in the large amount of water and bleach..." Most autoclave manufacturers void the warranty of autoclaving corrosive compounds unless the autoclave is specially lined.

And, if it contains bleach, you do not want to mix in acid. Stanford University has an excellent set of safety precautions on use of Sodium Hypochlorite (Bleach) and points out bleach mixed with acids can release chlorine gas.

As for your ultimate question, very few of the references focused on using bleach to destroy antibiotics, and those that did, none specifically list kanamycin.

Jeff


On Fri, Jun 10, 2022 at 1:53 PM Jennifer Gile <jen.gile**At_Symbol_Here**gmail.com> wrote:
All,

The NIH Drain Disposal guide came across my email recently, and it has left us with a question specifically about kanamycin. https://nems.nih.gov/Documents/NIH_Drain_Discharge_Guide.pdf

One of our researchers uses kanamycin in their antibiotic resistance studies. The total amount used over 10 weeks is about 100mg and would never exceed 200mg. They are working with microgram quantities on a weekly basis.

The NIH Drain Disposal guide suggests kanamycin should be treated as hazardous waste (collected and sent to disposal) Is anyone familiar with alternative disposal for kanamycin? Our concern is the very small amount of kanamycin in the large amount of water and bleach would have a drastic effect on our waste stream.

Is bleach sufficient to render the kanamycin appropriate for drain disposal? I have also seen suggestions that kanamycin be treated with acid to render it inactive and thus okay for drain disposal; but then wonder would neutralizing the acid (to make that appropriate for drain disposal) nullify the acid inactivation?

We do have access to an autoclave, but the NIH guide seems to suggest heat does not render kanamycin safe for the drain.

Your thoughts are appreciated,
Jennifer.

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas


--
Jeff Lewin
Director of Chemical Laboratory Operations
Research Integrity Office
Laboratory Operations
205 Lakeshore Center
Michigan Technological University

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.