Thank you to everyone who provided useful answers and resources on this thread. As always, it is interesting to see how seasoned professionals take on even the most basic of questions. Also, I always enjoy reading the historical perspectives that several members here bring to discussions like these. As you well know, newbies benefit far more from mentorship than a Google search.
On Sep 17, 2021, at 8:37 PM, John Callen <jbcallen**At_Symbol_Here**GMAIL.COM> wrote:*Message sent from a system outside of UConn.*Monona,The reason why I didn't include Kimberly-Clark and certain other manufacturers was based upon my chemistry experience from high school through research at 3M.Although it dates me, during that period, from 1961 until 1976, the use of "disposable/single use" examination gloves was not only unthinkable but also forbidden. I was acquainted only with and used the Ansell Solvex (nitrile), neoprene and natural latex rubber gloves with caliper thickness 15mil - 22mil for any and all work on the open lab bench, in a hood/cabinet or glove box.I may be "old fashioned" but also I have at home a supply of those type of gloves for housework. I do have a box of 4mil nitrile examination gloves but use them only for medical and personal hygiene reasons.Be Safe and Stay Healthy!John3M Personal Safety Division - RetiredACS/DCHAS Founding Member(312) 632-0195--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchasOn Sep 17, 2021, at 12:57, Monona Rossol <0000030664c37427-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU> wrote:John, you can add to the wonderful list of manufacturers Kimberly Clark who makes the thin examining gloves that most chemistry students and their teachers that I see actually use. And they do have a chart as I mentioned. But they also clearly say in their brochure that those gloves should be removed and replaced if a chemical even splashes on them. Monona--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas-----Original Message-----
From: John Callen <jbcallen**At_Symbol_Here**GMAIL.COM>
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Sent: Fri, Sep 17, 2021 12:08 pm
Subject: Re: [DCHAS-L] Glove permeation chart - not companyJessica,As per the replies to your request, the consensus is that you should work with the data as "manufacturer specific" and not "generic."Here are two helpful information sheets from W. W. Grainger, Quick Tips #166 & #191 on chemical resistant gloves.Also, you may want to speak to someone at the Technical Service Department of any one of the following manufacturers and Grainger for help.
- Ansell
- Grainger (distributor)
- Magid Glove & Safety (manufacturer/distributor)
- MAPA
- North by Honeywell
- SHOWA
Good Luck!Be Safe and Stay Healthy!All My Best,John B. Callen, Ph.D.3M Personal Safety Division - RetiredACS/DCHAS Founding Member(312) 632-0195On Sep 17, 2021, at 10:26, Margaret Rakas <mrakas**At_Symbol_Here**SMITH.EDU> wrote:you also have to take into account the glove thickness, which could vary by brand. Some nitrile gloves are 4 mm, others 8 mm...I don't think I would want a generic chart, so much depends on the mfg. And they have quite a bit of incentive to get it right...$$$$$My two cents...On Fri, Sep 17, 2021 at 7:44 AM Zack Mansdorf <mansdorfz**At_Symbol_Here**bellsouth.net> wrote:Nelson Schlatter (Ansell)--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchasZack MansdorfSent from my iPhone 7On Sep 17, 2021, at 5:32 AM, Bruce Van Scoy <bvanscoy**At_Symbol_Here**twc.com> wrote:=EF=BB=BF--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchasCaution: If you are going to be citing the NIOSH Recommendations for Chemical Protective Clothing for glove guidance - check when it was published, it is severely dated.Monona is right, look at the individual glove manufacturer for testing permeation and degradation information. If you do a Google search, you'll end up with generic information that will be unreliable - depending upon which glove has been specified.Suppliers and Google will provide generic "data" but nothing I would rely upon when you really need to confirm adequate protection.It's late and I can't remember the name of the organic chemist who started the testing work at Ansell. He developed the first spreadsheet, which later turned into their database. When I ran into a new molecule that was going to be tested for toxicity as an investigational new drug, if he could not refer to a very close analog to provide protection, I could send him a sample and he would test to provide a recommendation. It depends upon what you are trying to protect against. Is a generic, possibly diluted level of protection adequate or are you trying to protect from a true hazard?From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Elliot Stein
Sent: Thursday, September 16, 2021 7:23 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: Re: [DCHAS-L] Glove permeation chart - not company
The Recommendations for Chemical Protective Clothing database is a contractor's product procured by the National Institute for Occupational Safety and Health (NIOSH). Thus, the recommendations contained in this database do not necessarily reflect NIOSH policy.
The Recommendations for Chemical Protective Clothing database is a contractor's product procured by the National Institute for Occupational Safety and Health (NIOSH). Thus, the recommendations contained in this database do not necessarily reflect NIOSH policy.From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> on behalf of Jessica Martin <jessica.a.martin**At_Symbol_Here**UCONN.EDU>
Sent: Thursday, September 16, 2021 9:30 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Subject: [DCHAS-L] Glove permeation chart - not companyHi all,I am looking for a chart of chemical permeation of different types of gloves - BUT I am trying to find one that isn't produced by a for-profit company.Does anyone know if this exists? If so, link would be most helpful!Thanks!Best,Jessica A. Martin, Ph.D.NSF Graduate Research Fellow (2018-2021)Joint Safety Team, Founding Member (2018-2021)Pinkhassik Group, Department of Chemistry (2016-2021)University of Connecticut323-327-3974"To change a community, you have to change the composition of the soil…If you want to meet with me, come to the garden with your shovel so we can plant some sh-t."Ron Finley"Argue for your limitationsand sure enough they're yours."Richard Bach"You know, farming looks mighty easywhen your plow is a pencil, and you'rea thousand miles from the corn field."Dwight Eisenhower"Sometimes you just have to nodlike a lizard."Monica Nyansa--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas----- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchasMargaret A. Rakas, Ph.D.
Lab Safety & Compliance Director
Clark Science Center
413-585-3877 (p)--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
Previous post | Top of Page | Next post