From: s1kennedy <s1kennedy**At_Symbol_Here**COX.NET>
Subject: Re: [DCHAS-L] lab help for student with prosthetic hand
Date: Thu, 18 Mar 2021 21:47:25 -0700
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: 378sfdab9e-1**At_Symbol_Here**m0191391.ppops.net


We have also had good success using foam pipe insulation to improve grips. The cushioning seems to compensate for some shaking or unsteadiness in the grip.
Sheila



Sent from my Galaxy Tab¨ S2

-------- Original message --------
From: s1kennedy <s1kennedy**At_Symbol_Here**cox.net>
Date: 3/18/21 9:41 PM (GMT-08:00)
To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Subject: Re: [DCHAS-L] lab help for student with prosthetic hand

A ring stand and a variety  if clamps would be a good start.
A graduated cylinder can also be set in a large breaker, then steadied by setting a hand on the rim of the breaker.
Sheila Kennedy 



Sent from my Galaxy Tab¨ S2

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.