From: Stephen Beaton <Steve.Beaton**At_Symbol_Here**DAL.CA>
Subject: [DCHAS-L] Lab Ventilation
Date: Tue, 23 Feb 2021 14:30:10 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: YQBPR0101MB1156D61CE52F5FB923F7BF08F3809**At_Symbol_Here**YQBPR0101MB1156.CANPRD01.PROD.OUTLOOK.COM


Good morning all:

 

A similar topic on lab ventilation came up in DCHAS a number of years back, but I would like to dig a bit further. I am interested in your thoughts and feedback, especially if any new recommendations/best practices have been made, particularly in academic laboratories.

  1. What minimum air changes per hour (ACH) do you require for the following laboratories while occupied?

Follow up - what criteria do you use to classify high risk vs low risk research labs?

  1. Do you reduce the ACH for unoccupied laboratories?
  2. Has anyone done Computational Fluid Dynamic (CFD) analysis of their typical labs to validate that the air flow rates and directions are sufficient?

I'm reviewing our current practices, and looking at adopting from ANSI Z9.5 2012 and ASHRAE TC9.10 (some familiar names as contributors).

 

Your comments are greatly appreciated.

Steve

 

 

Stephen Beaton, MSc, CHO, CRSP
Chemical Safety Manager
Environmental Health and Safety Office

DALHOUSIE UNIVERSITY
902.494.1934

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.