From: DAVID Katz <DAKATZ45**At_Symbol_Here**MSN.COM>
Subject: Re: [DCHAS-L] "Hydrogen pop" demo and PPE
Date: Tue, 29 Dec 2020 17:51:09 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: BL0PR05MB5346C531D9C983A7CDC15CD8C5D80**At_Symbol_Here**BL0PR05MB5346.namprd05.prod.outlook.com
In-Reply-To


Hi Jyllian,
 
I recommend using an ignition tube (a heavy wall rimless test tube) for this experiment as it can take the impact of a small explosion.  Test tubes with rims may have small chips that compromise their integrity.  A test tube clamp should be used to hold the test tube.  The reaction should be far away from the experimenter's face.
 
I always do this with a candle, or other flame, located on a bench or table top and move the inverted test tube to the flame.  That way the reaction is not near my face.
 
I did take a photograph of the hydrogen flame in a test tube.  If you are interested, please email me.
 
Best regards,
 
David 
_________________________________________________________________________
 
  David A. Katz             
  Chemist, Educator, Expert Demonstrator, Science Communicator, and  Consultant
  Programs and workshops for teachers, schools, museums, and the public
  5003 Canby Dr. * Wilmington, DE 19808-1102 *  USA
  cell: (520) 465-5028 * email: dakatz45**At_Symbol_Here**msn.com
           Visit my web site:  http://www.chymist.com
_________________________________________________________________________
----- Original Message -----
From: Kemsley, Jyllian
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Sent: Tuesday, December 29, 2020 12:05 PM
Subject: [DCHAS-L] "Hydrogen pop" demo and PPE

Hi all--I'd appreciate any thoughts on someone wearing just eye protection for this demo. On the one hand, it's a small amount and the test tubes don't have constricted necks. On the other hand, it looks like a glass tube held in bare hands near the face.

 

https://twitter.com/I_am_Endeavour/status/1340788101283803140

 

It's been suggested as something to post in C&EN's "Chemistry in Pictures" collection for New Year's Eve, and I need to decide by tomorrow (Wednesday 12/30) whether to go ahead.

 

Thanks for your input!

Jyllian

 

Jyllian Kemsley, PhD [she/her/hers]

Executive Editor, policy and content partnerships

Chemical & Engineering News

M:  (+1) 925-519-6681 | Skype: jyllian.kemsley

Twitter: **At_Symbol_Here**jkemsley

Want to be in the know? Sign up for C&EN's weekly newsletter: cenm.ag/censubscribe

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.