From: edward sage <sage7652**At_Symbol_Here**BELLSOUTH.NET>
Subject: Re: [DCHAS-L] demonstration safety shield material
Date: Thu, 10 Sep 2020 20:03:57 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: 1755269945.2711661.1599768237450**At_Symbol_Here**mail.yahoo.com
In-Reply-To


Have been surprised that there has been no mention of tempered glass, or even better, laminated glass or wire-reinforced glass as the best safety shield material for use in a chemical environment. If you are considering a plastic material, strongly suggest that you familiarize yourself with the stress cracking/crazing of polymers, especially polycarbonate.

Here are two articles which can serve as an introduction to a large area of chemistry.

https://scholar.google.com/scholar?q=polycarbonate+stress+cracking&hl=en&as_sdt=0&as_vis=1&oi=scholart

https://www.plasticstoday.com/materials-analyst-part-22stress-cracking-how-avoid-silent-killer-part-1

Ed Sare
On Wednesday, September 9, 2020, 03:57:52 AM EDT, ILPI Support <info**At_Symbol_Here**ilpi.com> wrote:


Polycarbonate (trade name Lexan) is the ideal material.   Better impact and crack resistance than acrylic.  Polycarbonate scratches more easily, but it's worth the impact protection, hands down. Check out this video comparing the two: https://youtu.be/Hsls5ZPCUnE

Rob Toreki

 ======================================================
Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust.  Visit us at http://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012




On Sep 8, 2020, at 2:55 PM, Heather Zimmer <heather_zimmer**At_Symbol_Here**MILTON.EDU> wrote:

Hi everyone - 

We are putting up plexi shields to that clamp on the bench to divide them in half so students can work at opposite ends of the bench, facing each other.  My department chair just suggested that we order some of them in a "thicker plexi" so they can be repurposed as demonstration shields, something I have been advocating for for several years now.  Looking online, the shields I am finding are listed as "thick polycarbonate" (one site specifically said 3/16 in) or "acrylic".  Is there something more specific that you can recommend?  Members of my department really like to push beyond the boundaries of what I consider safe for chemistry demos, so I would love to protect students however I can.  

Thank you,
Heather Wages Zimmer

Science Department
Outreach Team
Norris House Advisor

Milton Academy

---For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas..orgFollow us on Twitter **At_Symbol_Here**acsdchas

---For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.orgFollow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.