From: James Kaufman <jim**At_Symbol_Here**LABSAFETY.ORG>
Subject: Re: [DCHAS-L] Chemical splash goggles without the D3 marking?
Date: Tue, 8 Sep 2020 14:24:15 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: CAHk9oER-4+6wziD2o8V-uZpbQA9hpmYWVCKZ9mF4vcPwU7R3pQ**At_Symbol_Here**mail.gmail.com
In-Reply-To <1C0CB625-4536-40FE-B272-BE24CE59C074**At_Symbol_Here**helixenv.com>


Speaking as a member of the ANSI Z-87.1 committee ....

The ANSI Z-87.1 does not certify. It provides a group of criteria and recommendations that were adopted by OSHA in 29CFR1910.133.

Eye and Face Protection device manufacturers are responsible for ensuring that their products meet the requirements of the standard.

This is unlike the ANSI Z-358.1 standard which specifically includes the word "certify" in it's glossary and recommendations. ... Jim

PS. "There's more to lab safety than just labs!"

James A. Kaufman, PhD

Founder/President Emeritus


The Laboratory Safety Institute (LSI)

A Nonprofit Educational Organization for Safety in Science, Industry, and Education

192 Worcester Street, Natick, MA 01760-2252

(O) 508-647-1900 (F) 508-647-0062 (C) 508-574-6264 Skype: labsafe; 508-401-7406

jim**At_Symbol_Here**labsafety.org www.labsafety.org Teach, Learn, and Practice Science Safely






On Tue, Sep 8, 2020 at 2:05 PM Ralph Froehlich <rfroehlich**At_Symbol_Here**helixenv.com> wrote:
Patrick:

Short answer - NO, without D3 rating, the goggles have not been certified by ANSI as liquid splash-resistant goggles. USE AT YOUR OWN PERIL!

LEIGH KRIETSCH BOERNER. C&EN Staff, has a thorough article on chemical splash resistant goggles in Chemical & Engineering News (August 31, 2020, p. 20) The article also reports the results of test subjects using the goggles for 2-hour periods prior to rating. Honeywell UVEX Flex Seal was the highest rated goggle.

Ralph A. Froehlich, CIH, CSP, QEP
Helix Environmental, Inc.
(937) 776-8435 cell

On Sep 8, 2020, at 12:23 PM, Patrick A Ceas <00001218cb57e854-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU> wrote:

Hi all,

I'm looking for clarity regarding chemical splash goggles (indirect vent) that are rated for ANSI Z87.1+ 2015 that do not have a D3 rating, such as these:

Compared to goggles that do have the D3 rating, such as these:

Is the D3 rating needed only on goggles that are sold overseas (i.e., not in the U.S.)?

If such indirect vented goggles do not have the D3 rating are they not considered chemical splash resistant in the U.S.? Can these not be worn/used as chemical splash resistant goggles?

I do have copies of ANSI Z87.1 (2020, 2015, 2010, 2003, 1989). I'm just seeking some clarity.

Thank you!

Pat



--
Patrick Ceas, Ph.D.
Chemical Hygiene Officer | Environmental Health & Safety
https://wp.stolaf.edu/brand/files/2018/01/Primary-Logo-on-White.jpg
Office: 507-786-3560 | Mobile: 507-321-0379
312 Regents Hall of Natural Sciences
1520 St. Olaf Avenue Northfield, MN 55057
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.