From: davivid <davivid**At_Symbol_Here**WELL.COM>
Subject: Re: [DCHAS-L] Schlenk Line Survival Guide
Date: Wed, 22 Apr 2020 12:32:46 -0700
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 0f67acc4-efbd-1780-42be-98274e6dd069**At_Symbol_Here**well.com
In-Reply-To


One thing to remember when using Schlenk lines or other vacuum apparatus
is that commonly used Tygon (or other vinyl) tubing is somewhat air
permeable. I have seen a rise of several tens of mtorr in the ultimate
vacuum of a system when a ~1 foot section of 1/4" ID x 1/2" OD Tygon
line was added via well clamped hose barbs. Tubing specified for vacuum
use has much thicker walls but is much stiffer and more difficult to
manipulate and places more force on the glassware when bent.

Best regards
Dave Lane
Principal
Clavis Technology Development

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.