From: Joseph Peters <joseph.peters**At_Symbol_Here**TECHNIPFMC.COM>
Subject: FW: [DCHAS-L] Question from Local Fire Department Regarding Equipment Disinfection
Date: Thu, 2 Apr 2020 17:11:37 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: AM6PR04MB6504B0E6EC01A873DC3B6EBA90C60**At_Symbol_Here**AM6PR04MB6504.eurprd04.prod.outlook.com
In-Reply-To


 

Our Operations Manager received an urgent call from a local Fire Department regarding the use of a fogger to disperse a mixture of a Cleaner Disinfectant and Propylene Glycol.

 

The Fire Department is looking for some advice about something they are trying to do sanitize their fire trucks and other equipment.

 

They are trying to create a fog of disinfectant cleaner using a Ryobe cordless fogger.  The cleaner disinfectant has the following composition:

 

Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium chlorides               0.15%

Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chlorides                                       0.15%

Inert Ingredients                                                                                                                                              99.70%

 

(Made by Spectral Chemical Co., Inc., Product SC-RTU-360)

 

However, with the disinfectant alone they were getting more of a mist than a fog.  Some of the firemen started experimenting and found that if they mixed propylene glycol with the disinfectant they got a much better fog.  The fog allows them to cover the fire trucks and other equipment with the mixture and allow it to sit for 15 minutes or so before rinsing off.

 

One note, this disinfectant has been approved by the EPA for use against COVID-19.

 

The Fire Department is interested in knowing if there is any chemical reaction between the cleaner disinfectant and the propylene glycol they should worry about and any health and safety aspects to consider.

 

Would appreciate any comments so we can provide assistance as requested.

 

Thanks in advance for the help.

 

Joe

 

 

Joseph C. Peters, PE

Senior Director  |  Process Technology

P  +1 781 340 2901  |  M  +1 617 620 7120

Joseph.peters**At_Symbol_Here**technipfmc.com

 

TechnipFMC

56 Woodrock Road |  E. Weymouth, MA |  02189

TechnipFMC.com

 

This email has been sent by or on behalf of TechnipFMC plc, a company registered in England and Wales with registered no. 09909709, and with its registered office address at One St. Paul’s Churchyard, London, EC4M 8AP, or one of its subsidiaries.

 

 

 

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.