From: "Stuart, Ralph" <Ralph.Stuart**At_Symbol_Here**KEENE.EDU>
Subject: Re: [DCHAS-L] Perchloric acid spill neutralization and absorption
Date: Wed, 8 May 2019 17:23:56 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 5CA4A75F-D5E5-4CAD-938D-1B891B9061FC**At_Symbol_Here**keene.edu
In-Reply-To


> Neutralization first, yes,

I'm not sure that "Neutralization first" is the best approach. My experiences with trying to neutralize spills of concentrated acids is that it takes much more neutralizer than one expects, leading to a major mess, and that the heat and splashes produced during the neutralization are a significant hazard unto themselves. I suspect that your idea of simply absorbing the spill into an inert solid to assist in packaging and disposal is a more practical approach.

Good luck.

- Ralph

Ralph Stuart, CIH, CCHO
Environmental Safety Manager
Keene State College
603 358-2859

ralph.stuart**At_Symbol_Here**keene.edu

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.