I was always taught to only use balloons for inert gases and that is what we follow where I am.
Monique Wilhelm
Laboratory Manager
Department of Chemistry & Biochemistry
University of Michigan - Flint
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU]
On Behalf Of Craig Merlic
Sent: Thursday, April 04, 2019 1:39 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [DCHAS-L] Safety with Hydrogen-Filled Balloons
Colleagues,
Following up on the explosion at IIT-Bombay which injured a professor and 2 interns:
And the dramatic acetylene balloon explosion:
http://www.esdjournal.com/static/Kansas/dauer%20truck.htm
This raises questions about the very common synthetic technique used in research labs of using hydrogen-filled party balloons for small scale reduction reactions at atmospheric
pressure. Researchers often fill party balloons with 1-5 liters of hydrogen at a regular gas cylinder, sometimes walk through the lab to their hood, and then connect the balloon to a reaction flask. (All that in contrast with hydrogenation under pressure
in a Parr reactor using fixed high pressure lines.)
I can envision a number of things to do to avoid or discharge static electricity, but wonder if others have experience in this.
Thanks,
Craig Merlic
Professor of Chemistry
UCLA Department of Chemistry and Biochemistry
Executive Director
UC Center for Laboratory Safety
Los Angeles, CA 90095-1569
Voice: 310-825-5466
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at
membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
Previous post | Top of Page | Next post