From: K Roy <safesci**At_Symbol_Here**sbcglobal.net>
Subject: Re: [DCHAS-L] Fancy nails in the lab
Date: Mon, 18 Feb 2019 13:54:58 +0000
Reply-To: K Roy <safesci**At_Symbol_Here**SBCGLOBAL.NET>
Message-ID: 824739371.965888.1550498098134**At_Symbol_Here**mail.yahoo.com
In-Reply-To


This is another angle to consider about artificial nails in the lab.  I am more concerned about flammability of the nails and do not allow them in the lab when active flames are in use.  If worn - heat protective gloves must be used.  Artificial nails (i.e. Acrylic nails) are highly flammable!  I learned about the flammability of acrylics when I was in grad school.  Worked 3rd shift in a plastics plant as a line inspector.  We used to produce long acrylic sheets or panels that were then cut and used for various items.  Acrylic unfortunately shatters like glass if cut with a hydraulic cutter.  Heaters were placed over the cutters to prevent the shattering and make a smooth cut.  One evening the acrylic sheet got caught on the corner of the cutter and was thrust up against the heater.  Within a matter of 30 seconds - the whole 20 feet of the acryllic panel burst into flames.  
Check out the following: "Beware flammable fingernails case report: synthetic fingernails result in full thickness burn and terminalisation" -  Beware flammable fingernails. case report: synthetic fingernails result in full thickness burn and terminalisation


Dr. Ken


Kenneth R. Roy, Ph.D.
Chief Safety Compliance Adviser
National Science Teachers Association (NSTA);
Safety Compliance Officer
National Science Education Leadership Association (NSELA);
Safety Committee Member
International Council of Associations for Science Education (ICASE);
General Manager / Senior Safety Adviser
National Safety Consultants, LLC
Safesci**At_Symbol_Here**sbcglobal.net



On Monday, February 18, 2019, 8:11:04 AM EST, Harry J. Elston <helston**At_Symbol_Here**MIDWESTCHEMSAFETY.COM> wrote:


My 2-cents:

If it is not interfering with the dexterity required for the operation, I won't have a problem with it.  

Harry 

Sent from my mobile device

On Sun, Feb 17, 2019, 20:57 Dra. Clara Rosal=C3=ADa =C3=81lvarez Ch=C3=A1vez <pissa_unison**At_Symbol_Here**hotmail.com wrote:
Hello everyone,

We have seen that some students and teachers use quite long fancy nails while working in the lab. This topic was the object of a discussion in UNISON (University of Sonora). The arguments  included the respect of the person to use that type of nails.  However, it was also commented that it is a risk for those who use those fantasy nails and also for those who are working around in the lab.

What is your opinion about it? Have you implemented any policy in this regard?

Best regards,

Rossy

Dra. Clara Rosal=C3=ADa =C3=81lvarez Ch=C3=A1vez
Profesora de Tiempo Completo
Universidad de Sonora
Hermosillo, Son. Me´xico

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.