From: Melissa Ballard <melissa.ballard**At_Symbol_Here**MICHELIN.COM>
Subject: Re: [DCHAS-L] lab sink question
Date: Thu, 14 Feb 2019 18:10:05 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: DB7PR09MB23947867F43A489335DD9C6482670**At_Symbol_Here**DB7PR09MB2394.eurprd09.prod.outlook.com
In-Reply-To <11a632bb4e1245b985ff8114caf6940f**At_Symbol_Here**CSI-EX03.FLAS.CSI.CUNY.EDU>


James,

I had found the PC-3 products online as well but wanted confirmation. The sink was installed in 2006. It doesn’t seem to be damaged from what the plumber has indicated (and it’s not really feasible to replace as it is an end piece part of a complete lab bench design). He has replaced the piping under the sink already but wasn’t satisfied with the material he used and wanted something better. Since I’ve been in this job, the only thing that goes down the drain are neutralized acids and general washings from when we wash glassware – nothing too aggressive. Of course I have no idea what happened prior to me getting here!

 

Thank you all for your help!

 

 

 

Melissa Ballard - MSPH, CIH, CSP, CCHO

Industrial Hygienist / Industrial Hygiene Chemist

Michelin North America

email: melissa.ballard**At_Symbol_Here**michelin.com

 

From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of James Saccardo
Sent: Thursday, February 14, 2019 11:54 AM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [EXT] Re: [DCHAS-L] lab sink question

 

-MB

The black composite material that you are looking for is called PC-3

https://www.smooth-on.com/products/pc-3/

https://farwestmaterials.com/products/pc-3

 

Please do consider replacing the sink, recommend it, or plan for it in the future.

 

Good Luck,

James

 

From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Melissa Ballard
Sent: Thursday, February 14, 2019 9:33 AM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [DCHAS-L] lab sink question

 

Would appreciate any assistance with this random laboratory question…The plumber at my facility is asking me what type of putty/epoxy/sealant (I really don’t know) he can use to repair the connection in our laboratory sink. It is where the sink basin connects to the drain. Over the years the old material has degraded and allowed for leaking. Any ideas on a specific product or even a generic material type?

 

The sink itself is the standard lab grade, black epoxy resin material you see in most labs.

 

Thanks,

 

 

Melissa Ballard - MSPH, CIH, CSP, CCHO

Industrial Hygienist / Industrial Hygiene Chemist

Michelin North America

email: melissa.ballard**At_Symbol_Here**michelin.com

 

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas


______________________________________________________________________________________
This email is being filtered with a new and better anti-spam solution. During the tuning phase, this solution may temporarily let some marketing emails pass through.
______________________________________________________________________________________

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.