From: Russell Vernon <russellnvernon**At_Symbol_Here**gmail.com>
Subject: Re: [DCHAS-L] Auto-ignition temperatures
Date: Tue, 11 Sep 2018 10:11:39 -0700
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: CAEv1zv1iBmPB9zfnBtqTuLzDbTBiOUe-ObGt6UhCJj0JyMdaCA**At_Symbol_Here**mail.gmail.com
In-Reply-To


Dear Tilak,
You have illustrated my concern about the removal of useful information in the name of GHS brilliantly.
Prior to GHS what was the criteria that an MSDS used to declare a substance pyrophoric? The fire code definition that uses autoignition temperature (equal to or less than 130F).
The GHS definition for H250 :
Chapter 2.9, Pyrophoric liquids - indicate whether spontaneous ignition or charring of the filter paper occurs, generally determined by Test N.3 (section 33.3.1.5 of the Manual of Tests and Criteria)
Chapter 2.10. Pyrophoric solids - indicate whether spontaneous ignition occurs when poured or within five minutes therafter, generally determined by Test N.2 (section 33.3.1.4 of the Manual of Tests and Criteria)
The US adoption of the GHS definition is codified at: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.1200AppB and is:

B.9 PYROPHORIC LIQUIDS

B.9.1 Definition

Pyrophoric liquid means a liquid which, even in small quantities, is liable to ignite within five minutes after coming into contact with air.

...

B.10 PYROPHORIC SOLIDS

B..10.1 Definition

Pyrophoric solid means a solid which, even in small quantities, is liable to ignite within five minutes after coming into contact with air.


so H250 now includes water reactives in addition to real pyrophoric materials


-Russ

russellnvernon**At_Symbol_Here**gmail.com




On Tue, Sep 11, 2018 at 8:21 AM TILAK CHANDRA <0000058f112ac338-dmarc-request**At_Symbol_Here**lists.princeton.edu> wrote:

From Sigma-Aldrich SDS:

https://www.sigmaaldrich.com/MSDS/MSDS/DisplayMSDSPage.do?country=US&language=en&productNumber=202584&brand=ALDRICH&PageToGoToURL=https%3A%2F%2Fwww.sigmaaldrich.com%2Fcatalog%2Fproduct%2Faldrich%2F202584%3Flang%3Den

GHS Label elements, including precautionary statements Pictogram Signal word Danger Hazard statement(s)

H250 Catches fire spontaneously if exposed to air.

H261 In contact with water releases flammable gases.. Precautionary statement(s)

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.

P222 Do not allow contact with air. P223 Do not allow contact with water. P231 + P232 Handle under inert gas. Protect from moisture. P280 Wear protective gloves/ eye protection/ face protection. P335 + P334 Brush off loose particles from skin. Immerse in cool water/ wrap in wet bandages.

Tilak

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU> On Behalf Of Jeffrey Lewin
Sent: Tuesday, September 11, 2018 9:42 AM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] Auto-ignition temperatures

The Alcoa GHS SDS I have for aluminum powder lists:

Product identifier ATOMIZED ALUMINUM POWDER

Auto-ignition temperature 1202 =B0F (650 =B0C) layered

Hazard statement May form combustible dust concentrations in air.

However, they also list DOT as not regulated.

The DOT Hazard Material Table lists:

Aluminum powder, coated as DOT 4.1 (Flammable Solid)

Aluminum powder, uncoated as DOT 4.3 (Dangerous when wet)

Jeff

On Tue, Sep 11, 2018 at 5:34 AM Debbie M. Decker <dmdecker**At_Symbol_Here**ucdavis..edu> wrote:

Hi All:

We're working through a list of materials classified as H250 (pyrophoric) but are having a terrible time finding auto-ignition data to back up that classification. It appears to have evaporated off Sigma SDS' and other sources (CRC, PubChem, ChemSpider, CAMEO) don't seem to have it either. Most irritating, to me, is the classification of powdered aluminum as pyrophoric with no auto-ignition data to back it up - just a note "ignites on contact with air." If that were the case, the entire pyrotechnic and propellant industries would have folded up by now.

Does anyone out there have auto-ignition data in a format they're able/willing to share? Or have any insight into where the data has gone off to?

Thanks mucho,

Debbie

Debbie M. Decker, CCHO, ACS Fellow

Past Chair, Division of Chemical Health and Safety

Councilor and Programming Co-Chair

University of California, Davis

(530)754-7964

(530)304-6728

dmdecker**At_Symbol_Here**ucdavis.edu

Birkett's hypothesis: "Any chemical reaction

that proceeds smoothly under normal conditions,

can proceed violently in the presence of an idiot."

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--

Jeff Lewin

Chemical Safety Officer

Compliance, Integrity, and Safety

Environmental Health and Safety

Michigan Technological University

Houghton, MI 49931

O 906-487.3153

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.