From: Benjamin Partridge <bpart**At_Symbol_Here**SAS.UPENN.EDU>
Subject: Re: [DCHAS-L] Emergency Shower and Eyewash Temperatures
Date: Sun, 8 Jul 2018 10:30:49 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: CABfi9DgXE5P-d3zG106RM97UerQLAokSQWF8jSRtd-toV7=uNQ**At_Symbol_Here**mail.gmail.com


Tyrell, Penny, and all,

We had a similar problem after a lab renovation in our department - the eyewashes started cold and seemed to get progressively warmer as flow continued.

There's a host of information on https://www.ccohs.ca/oshanswers/safety_haz/emer_showers.html (which references ANSI Standard Z358.1-2014 "Emergency Eyewash and Shower Equipment"). Water should be "tepid" (defined by the standard as between 60 and 100 =B0F). Essentially, not so cold as to be uncomfortable but no warmer than body temperature.

Credit to our Sr. Lab Safety Specialist, Kimi Brown, who found this information when we were having issues.

Best,

Ben

--
Benjamin E. Partridge
PhD Candidate
Department of Chemistry
University of Pennsylvania

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.