From: DCHAS Membership Chair <membership**At_Symbol_Here**DCHAS.ORG>
Subject: [DCHAS-L] Power Tool Safety in Science Labs
Date: Fri, 25 May 2018 07:23:50 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 38FE8121-AFE9-4EB9-9EAA-154F2FEC8373**At_Symbol_Here**dchas.org


http://nstacommunities.org/blog/2018/05/24/power-tool-safety-in-science-labs/

Power Tool Safety in Science Labs

The use of power tools, such as table saws, drill presses, and miter saws, is becoming more common in science and STEM laboratories. All power tools have special mechanical and non-mechanical safety hazards that can result in injuries, including abrasions, burns, and fractures. This blog post describes machine-guarding safety protocols that schools need to develop to minimize such safety hazards.

Why machine guards matter

Machine guards are fixed, interlocked, or adjustable physical barriers critical to protecting their operators and those working in the surrounding area from hazards. According to the Occupational Safety and Health Administration (OSHA), machine guarding prevents such safety hazards as rotating parts, flying chips, and sparks.

.....

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.