From: "Turner, Mark O (DOH)" <mark.turner**At_Symbol_Here**DOH.WA.GOV>
Subject: [DCHAS-L] Labs and Earthquakes
Date: Fri, 20 Apr 2018 22:39:51 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: F19ECA75CDD75E478C5BCDE4C50D3DBF43E74B57**At_Symbol_Here**WAXMXOLYMB023.WAX.wa.lcl


Greetings,

 

I am working on putting together some laboratory earthquake preparedness training and was wondering if anyone out there has some good pictures of labs after an earthquake they are willing to share.  Also, if you have any pictures of controls you use to reduce debris during an earthquake that would also be appreciated. 

 

The audience for this will not be building new labs or doing major remodeling, but instead the focus is on things that can be done in a working laboratory to keep lab workers safe during an earthquake.  Thank you for any assistance or suggestions you can offer.

 

Mark

 

Mark Turner

Safety Officer

Department of Health

Public Health Lab

1610 NE 150th St.

Shoreline, WA 98155

Phone: (206) 418-5524

Mobile: (206) 418-9580

 

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.