From: Ralph Froehlich <rfroehlich**At_Symbol_Here**HELIXENV.COM>
Subject: Re: [DCHAS-L] Beryllium Monitoring
Date: Mon, 2 Apr 2018 09:25:12 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 54A43C84-1891-43E5-86D9-1B4F97DC3328**At_Symbol_Here**helixenv.com
In-Reply-To


We have performed beryllium exposure monitoring for a university research group as a third-party industrial hygiene consultant. Although no detectable beryllium exposure was found, the most important improvement over the anticipated testing was the use of an airtight enclosure around the testing equipment. The use of a plastic barrier minimized the need for cleaning all surfaces in the lab room after testing.


Ralph A. Froehlich, CIH, CSP, QEP
Helix Environmental, Inc. 
(937) 226-0650 office
rfroehlich**At_Symbol_Here**helixenv.com

The information contained in this electronic transmission is intended solely  for the recipient of this email. This electronic mail transmission may contain confidential or privileged information. If you have received this email in error, then any distribution, reading, copying, or use of this communication is strictly prohibited. Please notify us immediately of the error by phone or email. Thank you. helix**At_Symbol_Here**helixenv.com


On Apr 2, 2018, at 9:05 AM, Sandhya Muralidharan <sandhya.muralidharan**At_Symbol_Here**STONYBROOK.EDU> wrote:

Dear All, 

We have a researcher who is planning to work with new beryllium materials using in-lab sintering technology and then characterizing those materials. My question is regarding monitoring, 

* What is the monitoring method used at your institute ? 
* Is monitoring performed  by EHS, or third party or by lab personnel themselves ? 
* If monitoring is performed by lab personnel then do they receive specific training on monitoring methods ? 

Regards, 

Sandhya

--
Sandhya Muralidharan, PhD
Laboratory Safety Specialist
Environmental Health & Safety
Stony Brook University 
New York

phone - 6316329672
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.