From: Stephen Stepenuck <sstepenuck**At_Symbol_Here**ne.rr.com>
Subject: Re: [DCHAS-L] Pottery Glaze Ingredient Determination
Date: Sat, 3 Feb 2018 02:38:13 -0500
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: D69ACF99.397C1%sstepenuck**At_Symbol_Here**ne.rr.com
In-Reply-To <161578d835a-1721-161e10**At_Symbol_Here**webjas-vaa235.srv.aolmail.net>


I’m sure Monona can handle that job probably better than anyone on the planet, but to save her from inundation, and FWIW, if anyone finds on doing an inspection or whatever, a container with only an archaic or trade name, you might try RTECS [The Registry of Toxic Effects of Chemical Substances].  I always figured a subscription to that was worth it for this “switchbook” function alone.

Good luck,
Steve
--
Stephen J. Stepenuck, Ph.D.
Emeritus professor of chemistry
Keene State College
Keene NH 03435-2001
sstepenuck**At_Symbol_Here**ne.rr.com
603.352.7540

On 2/2/18, 12:25 PM, ACS Division of Chemical Health and Safety on behalf of Monona Rossol  wrote:

No prob.  Just send it to me off list.  Ceramic suppliers, even today, sometimes use terms from the days of Alchemy.  


Monona Rossol, M.S., M.F.A., Industrial Hygienist
President:  Arts, Crafts & Theater Safety, Inc.
Safety Officer: Local USA829, IATSE
181 Thompson St., #23
New York, NY 10012     212-777-0062
actsnyc**At_Symbol_Here**cs.com   www.artscraftstheatersafety.org

 


-----Original Message-----
From: Elmore, Kimberly A <elmorek**At_Symbol_Here**CAMPBELL.EDU>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Sent: Fri, Feb 2, 2018 11:30 am
Subject: [DCHAS-L] Pottery Glaze Ingredient Determination

Good morning!
 
A professor in my department is developing a lab for a chemistry in art course and would like to have students mix pottery glazes (on a very small scale and for one experiment only) according to an old ‘recipe’ provided by our art department.  The problem is that the names of the compounds as written in the recipe are not the actual chemical names, making it impossible to look up an SDS to research the hazards, and the art department doesn’t have this information, maybe never did. They quit using the recipe because they’re not set up to handle the hazards.
 
I hope some of you who are knowledgeable about pottery glazes can help me identify the real chemical names for these compounds, or point me in the right direction for doing so.  Because of the listserv’s permissions, I can’t attach the recipe to this email, but if you think you can help, please email me and I’ll send it to you for a look.
 
I'd be grateful for any help you can give!
 
Kim Elmore
Laboratory Manager, Safety Officer
Department of Chemistry and Physics
Campbell University
 
 
 
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.