Hi All,
Once you're done hashing out all the building design issues, don't forget about the construction side of it.
Someone needs to keep an eye on the lowest bidder who is building it.
We've run into a couple situations where something was obviously wrong and the guys doing the work didn't want to even ask about it because ÔThat's what's on the blueprint.'
(Don't worry, we got them to move the transformer out from directly in front of a door)
Also, don't believe them when they say they've tested something like monitoring systems.
Make sure equipment and HVAC units are installed correctly and no shortcuts have been taken.
-Brady
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L@PRINCETON.EDU]
On Behalf Of Monona Rossol
Sent: Friday, November 17, 2017 8:37 AM
To: DCHAS-L@PRINCETON.EDU
Subject: Re: [DCHAS-L] New Science Building- Things to Look Out For
Perfect companion piece to read. And you shouldn't have to "fight" for any of this.
Monona Rossol, M.S., M.F.A., Industrial Hygienist
President: Arts, Crafts & Theater Safety, Inc.
Safety Officer: Local USA829, IATSE
181 Thompson St., #23
New York, NY 10012 212-777-0062
-----Original Message-----
From: Barbara Foster <bfoster@WVU.EDU>
To: DCHAS-L <DCHAS-L@PRINCETON.EDU>
Sent: Fri, Nov 17, 2017 8:45 am
Subject: Re: [DCHAS-L] New Science Building- Things to Look Out For
.Appropriately sized spaces to accommodate students with disabilities (and service dogs or signers for hearing impaired students)
.Be prepared to fight for drains for your safety showers
.Ample storage space away from the benchtops for coats, backpacks, purses, etc.
.Generous fume hood/bench space for each student
.Do you require balance/instrument rooms that are separate from the labs?
.Think about what you need in terms of data ports, AV equipment, and large monitors and their placement within the rooms
.A desk up front for your TA and design the labs so that the TA has a clear line of sight to all of the students, if possible
.Intercom system needed?
.What do you need for the prep room and stockroom? Storage systems, benches, fume hoods, etc.
.Fire suppression systems Ð the project manager will require your full chemical inventory for this
.Equipment that will require special electrical outlets
.Placement of white boards/blackboards in the labs
.Dispensing hoods for experimental work and also for the haz waste containers in the labs
Just a few thoughts on a Friday. Feel free to contact me directly if you have additional questions. As you can tell, we went through this a few years ago to totally renovate some labs on the Evansdale campus.
Barbara L. Foster
College Safety Officer
Eberly College of Arts and Sciences
West Virginia University
DCHAS Fellow - American Chemical Society
304-293-2729 (desk)
304-276-0099 (mobile)
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L@PRINCETON.EDU]
On Behalf Of Melissa Anderson
Sent: Thursday, November 16, 2017 7:28 PM
To: DCHAS-L@PRINCETON.EDU
Subject: [DCHAS-L] New Science Building- Things to Look Out For
Hi Everyone,
We're in the planning process for a new science building (we're a two-year community college with a strong STEM reputation and a very small informal undergrad research program). Does anyone have any lessons learned or other recommendations as we start working with the architects when it comes to planning out our chemistry labs?
Thanks!
Melissa Anderson
Chemistry Instructor
Pasadena City College
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary@dchas.org Follow us on Twitter @acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary@dchas.org Follow us on Twitter @acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary@dchas.org Follow us on Twitter @acsdchas
CONFIDENTIALITY NOTICE:
This e-mail message, including any attachment, is for the sole use of the intended recipient(s) and may contain legally privileged and/or confidential information. Unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient of this message or if this message has been addressed to you in error, please contact the sender by reply e-mail and delete and destroy all copies of the original message.