From: Elizabeth Brubaker <ebrubaker**At_Symbol_Here**MURRAYSTATE.EDU>
Subject: [DCHAS-L] Fume Hood Ducting
Date: Thu, 12 Oct 2017 15:13:50 -0500
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: CABHsGwQ96Ht0TgzJ2rOtRg0yB0G6N8n9xZ=pqReaM1cnZHW-Cg**At_Symbol_Here**mail.gmail.com


Has anyone experienced accumulation of oil (perhaps mineral oil from a heated oil bath?) in fume hood duct work? Is this reasonable or even possible? Could a sufficient amount remain in the system for it to condense out in the ducts when the exhaust fans were turned off for an extended period?

--
Beth Brubaker
Laboratory/Safety/Waste Coordinator
Murray State University Department of Chemistry
2226 Jesse D. Jones Hall
Murray, KY 42071-3300
(270) 809-6390
ebrubaker**At_Symbol_Here**murraystate.edu
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.