From: Monona Rossol <0000030664c37427-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] Fume Hood Regs
Date: Thu, 24 Aug 2017 08:07:32 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 15e1423ebf7-46e1-9530**At_Symbol_Here**webjas-vab059.srv.aolmail.net
In-Reply-To


Thanks Harry, I knew someone would get this.  OSHA doesn't require any specific ventilation equipment.  OSHA requires 1) a chemical exposure risk assessment after which the employer must provide 2) whatever works to keep exposure below any action level or PEL.  And since the PPE rules require engineering controls when "feasible" rather than respirators, that leaves the obvious conclusion that ventilation is needed.  


For chemists, the best solution is the fume hood.  In art where work in the open is needed, usually some other local exhaust system such as a spray booth, slot hood, flex duct, etc.

In the case of labs, this is complicated by the vast numbers of different chemicals that might be used.  No one would want to have people work with each of these chemicals in the open so they could do a personal monitoring to assess the risk for each.  So the assumption is made that snorting solvents is probably not a good thing and using all the nasty stuff in a hood saves time and money because no personal monitoring risk assessment is usually needed.

I really think the desire to see a written requirement for fume hoods is generated by the inability of many of our administrators to follow this logical reasoning.  Most seem to need (or demand) short, simple rules under the heading: "achtung." 


Monona Rossol, M.S., M.F.A., Industrial Hygienist
President:  Arts, Crafts & Theater Safety, Inc.
Safety Officer: Local USA829, IATSE
181 Thompson St., #23
New York, NY 10012     212-777-0062

 


-----Original Message-----
From: Harry J. Elston <helston**At_Symbol_Here**MIDWESTCHEMSAFETY.COM>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Sent: Thu, Aug 24, 2017 5:16 am
Subject: Re: [DCHAS-L] Fume Hood Regs

Monique,

The short answer is that there are no regulations as to when a hood is required.  Russ has it down, with the inclusion that the Laboratory Standard employers to maintain exposure levels below the Action Level (if one is present) or PEL (if one is present) for the chemicals being used in a laboratory.  

ANSI Z9.5 is not a regulation:  It is an industry consensus standard or best management practice.

Harry

On Wed, Aug 23, 2017 at 3:20 PM, Russ Phifer <rphifer**At_Symbol_Here**wcenvironmental.com> wrote:
The correct answers to which regulations may help you decide when a ducted fume is needed -                                                                                                                     
 
1. Whenever your Chemical Hygiene Plan says so.
2. The OSHA Laboratory Standard clearly implies that a vented hood should be used when volatile or toxic substances are present which may result in an exposure above PELs or a chemical health or physical hazard that may be eliminated by engineering controls.
3. The OSHA General Duty Clause indicates it is the employer's obligation to safe workplace for all employees. That would logically include providing appropriate controls, including proper ventilation.
 
Russ
Russ Phifer, Executive Director
National Registry of Certified Chemists
125 Rose Ann Lane
West Grove, Pennsylvania 19390
 
 
-----Original Message-----
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Smallbrock, Margaret A.
Sent: Wednesday, August 23, 2017 3:35 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] Fume Hood Regs
 
I would be interested in this as well.
 
 
Margaret Smallbrock
 
Campus Environmental Health and Safety Manager Environmental Health & Safety South Dakota School of Mines
501 East St. Joseph Street
Rapid City, SD 57701-3995
 
 
 
-----Original Message-----
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Wilhelm, Monique
Sent: Wednesday, August 23, 2017 12:15 PM
Subject: [DCHAS-L] Fume Hood Regs
 
Does anyone know of any regs that specifically state WHEN fume hoods are required,  specifically ducted hoods?
 
Thank you,
Monique
 
 
 
Sent from my Verizon, Samsung Galaxy smartphone
 
---
For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
 
---
For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas



--
+++++++
Harry J. Elston, Ph.D., CIH
Principal
Company Information
Google+
Twitter: **At_Symbol_Here**MidwestChemSafe
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.