Out of curiosity, I looked up glass marking in Coyne "The laboratory Companion" a book I believe recommended by someone on DCHAS-l.  One option they suggest is using a titanium pen.  the text notes "...the markings are not easy to see (only 0.25 mm wide)."   I have not practical experience with this, but google does get numerous hits.  Here is one of the first ones (no endorsement, just high on the list):

Rob,

The link for Chapter 11 - Stress and Strain in Glass results in Error 404-Not Found.

Regards,

Ernie Lippert

 

 

 

---

From: "ILPI Support" <info**At_Symbol_Here**ILPI.COM>
Sent: Friday, May 5, 2017 12:21 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] Glassware Inventory

 

The only sure way to do it is to go with borosilicate decals. These are water-slide on (like a temporary tattoo) that must then be baked on at about 1100 F.  Your issue will be that there's a setup charge for most of these, and there's usually a lead time.

 

Given your needs, I think the solution is to order page size sheets of numbers, letters, words, phrases etc. that you can cut out an apply to create the markings you need without running up a huge bill  for individual setup or having to wait for custom printing. You will, of course, need an oven/furnace capable of getting up to the required temperature and allowing the glass to cool back down slowly.

 

If you do a web search on "borosilicate decals" you'll find a bunch of suppliers. If you are looking for recommendations, almost any scientific glassblower (and many art glassblowers) can give you one.

 

One other purchase you may wish to make is a polariscope.  There's a writeup on glass stress and strain as well as polariscopes at our Scientific Glassblowing Learning Center page: http://www.ilpi.com/glassblowing/glassstress.html

 

Best wishes,

 

Rob Toreki

 

 ======================================================

Safety Emporium - Lab & Safety Supplies featuring brand names

you know and trust.  Visit us at http://www.SafetyEmporium.com

esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412

Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012

 

 

 

On May 5, 2017, at 11:08 AM, Corcoran, Hannah <Hannah.Corcoran**At_Symbol_Here**EMERALDMATERIALS.COM> wrote:

 

Our synthesis research lab has been discussing how to set up an inventory for all laboratory glassware beyond the quantity of each item.  I was curious if there was a way to track each piece. 

 

For example:

We have 4 100-mL single neck round bottoms.

Over the past 5 years we have bought 12 of these round bottoms.  8 have been cracked/broken/borrowed/etc.

Is there a way to keep track of each of the 12, so that we know which dates the 4 we currently have were purchased?  

 

Ideally the marking/labeling/serial number/etc. would:

- Not compromise the integrity of the glassware

- Be able to withstand the high temperatures of reactions (up to 290C)

- Be able to withstand a dishwasher cycle for cleaning

- Be resistant to Acetone/MeOH/Water

 

Goals of this inventory:

- Track age of glassware.

- Be able to list specific glassware used in reactions for continuity and sources of variables.

- Restrict certain pieces to fragrance synthesis only.

 

Emerald Kalama Chemical is an industrial chemical company that manufactures specialty chemicals.  This is specifically for our R&D Synthesis laboratory.

 

Thank you in advance for your input!

 

 

Hannah Corcoran

R&D Facility Lead

Emerald Kalama Chemical, LLC

1296 Third St NW

Kalama, WA 98625

360-673-0319  (office)

hannah.corcoran**At_Symbol_Here**emeraldmaterials.com

 

"Attitude is a little thing that makes a big difference." - Winston Churchill

 

 

Keeping Life in Your Products.  Visit EmeraldMaterials.com

CONFIDENTIALITY NOTICE: Both the individual sending this e-mail and Emerald Performance Materials, LLC intend that this electronic message be used exclusively by the individual or entity to which it is intended to be addressed. This message may contain information that is privileged, confidential and thereby exempt and protected from unauthorized disclosure under applicable law. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, be aware that any disclosure, dissemination, distribution or copying of this communication, or the use of its contents, is not authorized and is strictly prohibited. If you have received this communication and are not the intended recipient, please notify the sender immediately and permanently delete the original message from your e-mail system.

--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--