From: "Secretary, ACS Division of Chemical Health and Safety" <secretary**At_Symbol_Here**DCHAS.ORG>
Subject: [DCHAS-L] C&EN Safety Zone blog: From the archives: UC Berkeley lab demolished when molten salt bath explodes
Date: Wed, 1 Mar 2017 08:16:53 -0500
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 8D6C83A4-62B1-4C24-B9AB-431CB4B7F456**At_Symbol_Here**dchas.org


http://cenblog.org/the-safety-zone/2017/03/from-the-archives-uc-berkeley-lab-demolished-when-molten-salt-bath-explodes/

=46rom the archives: UC Berkeley lab demolished when molten salt bath explodes

More from last week's trip into the C&EN archives.
=46rom Oct. 11, 1982:
Molten salt baths cited as lab hazards
Caption from 1982: Berkeley lab was demolished when a heated nitrite/thiocyanate mixture exploded
Caption from 1982: Berkeley lab was demolished when a heated nitrite/thiocyanate mixture exploded
A University of California, Berkeley, lab has been rebuilt and is ready for use again after being demolished in late July by the explosion of a molten salt bath. Berkeley chemistry and chemical engineering faculty members are concerned that many researchers are unaware of the potential dangers of these commonly used heat-transfer media.

The explosion involved a glass polymer-synthesis apparatus immersed in a fused salt bath containing 3 lb of sodium nitrite and 1 lb of potassium thiocyanate. The bath had been heated above 270 =B0C using a hot plate. The experiment was being conducted in a closed fume hood.
The explosion, which Berkeley faculty members estimate had the force of about 1 lb of dynamite, caused more than $200,000 damage to the new lab. The doors of the fume hood were imbedded in a wall 20 feet from the point of explosion and the interior walls of the lab were bulged outward. The chemical engineering graduate student conducting the experiment escaped probable death only because he was bending over to work on a floor vacuum pump at the time of the explosion.
Book references to molten salts imply that they may be used freely, according to C. Judson King, dean of Berkeley's College of Chemistry. "Molten salts are safe - that's the message," he says.
Some may be, but others clearly are not. Mixtures of salts for heat transfer are common and are marketed commercially. Such commercial mixtures contain, for example, potassium nitrate, sodium nitrate, and sodium nitrite.
King points out that, in the commercial mixtures, all of the components are oxidizers. In the mixture that exploded at Berkeley, thiocyanate, a reducer, was included and seems to have triggered the explosion. Mixtures that contain only nitrate and thiocyanate do not seem to explode. The explosive reaction involved nitrite and thiocyanate. 
The literature is not of much help in elucidating the problem. The dangers of the mixture are not mentioned in the molten salt safety review in the Journal of Hazardous Materials, King says. An extensive literature review carried out by King unearthed a 1945 Soviet publication that reported that some mixtures of potassium nitrite and potassium thiocyanate exploded when heated above 370 =B0C.
"A small community of industrial chemists is aware of the dangers of molten salt baths," King says. "However, the information does not seem to have filtered down to the rest of the chemical community."
-Rudy Baum, C&EN San Francisco





Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.