I disagree w/ you about the type company to hire. Any skilled carpenter in the craft trades will be able to do the project. You will need to clearly explain that the frame needs to be pre-assembled outside the lab and then just bolted together. You need to consider how the frame will physically secure in place to the floor or vacuum line support.
I would cover the vac line with cloth for dust control
I can see a design with the top and upper half of the sides made out of =BC" interior plywood. The skeleton and low half exterior would be 1x1 or 2x4.
A good crating company with experience in crating fragile stuff for long distance shipment will suffice.
You will need to do some hazard recognition training AND provide continuous supervision while they are in the lab.
Neal
------------------------------------------------------------------------------------
The information contained in this message is privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.
ACSafety has a new address:
NEAL LANGERMAN, Ph.D.
ADVANCED CHEMICAL SAFETY, Inc.
PO Box 152329
SAN DIEGO CA 92195
011(619) 990-4908 (phone, 24/7)
We no longer support FAX.
Please contact me before sending any packages or courier delivery. The address for those items is:
5340 Caminito Cachorro
San Diego CA 92105
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Chance, Brandon
Sent: Wednesday, October 12, 2016 2:19 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [DCHAS-L] Protecting Vacuum Lines during renovations
DCHASers,
We have a building wide lab renovation project starting up that involves ventilation upgrades and installation of sprinkler systems. A number of these labs have glass vacuum line systems that are 6-12ft long, some containing various mercury containing components. Due to the size and intricacy of the systems, there is a significant hazard involved with dismantling them and the labs would like to leave them in place and have them protected in some fashion.
Does anyone have any recommendations to have them crated in place or whom would be the best type of company to reach out to? I wouldn't trust a standard crating company with this project and we are currently reaching out to the local scientific gas blower that made the systems for his suggestions.
Thoughts would be appreciated.
Regards,
Brandon S. Chance, M.S., CCHO
Associate Director of Environmental Health and Safety
Office of Risk Management
Southern Methodist University
PO Box 750231 | Dallas, TX 75275-0231
T) 214.768.2430 | M) 469-978-8664
"- our job in safety is to make the task happen, SAFELY; not to interfere with the work-" Neal Langerman
--- This e-mail is from DCHAS-L, the e-mail list of the ACS Division of Chemical Health and Safety. For more information about the list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org
Previous post | Top of Page | Next post