From: Dr Bob <drbob**At_Symbol_Here**FLOWSCIENCES.COM>
Subject: Re: [DCHAS-L] Laboratory Gas Storage separation of Incompatibles
Date: Tue, 2 Aug 2016 11:51:06 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 7B39633B01F4EE42A269E983C42F5A480AF5AB31**At_Symbol_Here**SULFATE.fsidomain.local
In-Reply-To


Hi Chris!

 

Again-.air changes!

 

Very Truly Yours,

 

Dr. Bob Haugen

Director of Product and Technology Development

Flow Sciences Inc.

2025 Mercantile Drive

Leland, NC 28451

 

Phone 910 332 4878

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu] On Behalf Of Kohler, Christopher E
Sent: Tuesday, August 02, 2016 7:00 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Laboratory Gas Storage separation of Incompatibles

 

 

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

Whats the best way to store and separate the following gases in a laboratory within the regulations..

 

We have a potential gas storage room (that would need to be converted), a single cylinder vented cabinet (but could purchase more), and the usual lab wall storage.

 

O2,  CO, CO2, H2, He, CH4, propane, and compressed air.

Thanks,

Chris

IU EHS, Lab Safety Manager

 

 



Spam
Phish/Fraud
Not spam
Forget previous vote

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.