From: Luis A Samaniego <l-samaniego**At_Symbol_Here**NORTHWESTERN.EDU>
Subject: Re: [DCHAS-L] Hydrogen safety webinar?
Date: Wed, 4 May 2016 16:30:48 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 62f089f762d2478392b7f8faeb7c27b3**At_Symbol_Here**evcspmbx01.ads.northwestern.edu
In-Reply-To


Is bonding and grounding ok for flammable gases or does it only apply to flammable liquids?

Is quantity and location a factor?

Please give advice.

 

Luis Samaniego

Sr Laboratory Safety Specialist

Northwestern University

Office for Research Safety

303 East Chicago Avenue

Ward B-106, W223

Chicago, IL 60611

(312)503-8300

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu] On Behalf Of margie.brazelton**At_Symbol_Here**AM.DYNONOBEL.COM
Sent: Wednesday, May 04, 2016 11:11 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Hydrogen safety webinar?

 

I agree.  While I work in a lab that supports chemical manufacturing, I am embarrassed to admit that everything here is set up as it has been for essentially the last 30 years.  It was all set up originally by a somewhat maverick, free-thinking M..S. (Chemistry) and has served safely all these years.  But he died a couple of years ago, making me the senior (by years of service) person and now I have grave doubts and worries.  While our gases are stored and used in a more robust safety setup, I am now really concerned about the lack of monitoring for leaks of the gases used (H2, N2, He, nitric oxides, methane, ammonia, O2, etc).  We have NOTHING in our storage area or lab to monitor for leaks!

Best regards,
Margie Brazelton
Senior Process Chemist

Dyno Nobel Inc.
A business of Incitec Pivot Limited
Cheyenne Plant, P.O. Box 1287 / Cheyenne, WY 82003, 8305 Otto Road / Cheyenne, WY 82001, USA
Office: +1 307 637 2766 | Fax: +1 307 771 5637  | Mobile: +1 307 631 8368
mailto:margie.brazelton**At_Symbol_Here**am.dynonobel.com
http://www.dynonobel.com

Groundbreaking Performance Through Practical Innovation



From:        "Reinhardt, Peter" <peter.reinhardt**At_Symbol_Here**YALE.EDU>
To:        DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Date:        05/04/2016 08:19 AM
Subject:        [DCHAS-L] Hydrogen safety webinar?
Sent by:        DCHAS-L Discussion List <dchas-l**At_Symbol_Here**med.cornell.edu>





I would really appreciate it if DivCHAS or AIHA did a webinar on hydrogen safety as it pertains to research laboratories. There have been three hydrogen explosions at universities since 2010 (U. Missouri, Stoney Brook U. and U. Hawai’i). Scientists and EHS staff need better training on hydrogen safety, risks to look out for, and how to do a hazard assessment for research involving hydrogen. When we ask researchers about their setup, they say, “I’ve been doing this for years. This is the same setup described in the literature/that my mentor uses.” Please.
 
Pete
 
Peter A. Reinhardt
Director, Office of Environmental Health & Safety
Yale University
135 College St., Suite 100
New Haven, CT   06510-2411
(203) 737-2123
peter.reinhardt**At_Symbol_Here**yale.edu
 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.