From: Allen Niemi <anniemi**At_Symbol_Here**MTU.EDU>
Subject: Re: [DCHAS-L] Standard Chemical Fume Hood Face Velocities
Date: Wed, 20 Apr 2016 09:09:53 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAN0bzO6fvkM916rFkPht+99FwSuCqxKzNDH_VPgpTr-b8AH3EQ**At_Symbol_Here**mail.gmail.com
In-Reply-To <004f01d19aa4$a48bbb70$eda33250$**At_Symbol_Here**rochester.rr.com>


I agree 100% with Peter's comments, below. I would also go further to clarify that one of the components of the work space that must be considered is the people who work there. In our case there is a broad range of user knowledge among our graduates and undergraduates doing independent research. We cannot count on them to follow the necessary work procedures to maintain containment in a hood design that requires it for proper function.

Al

On Tue, Apr 19, 2016 at 9:33 PM, Peter Zavon <pzavon**At_Symbol_Here**rochester.rr.com> wrote:

Yes, a hood can have good containment with only 60 fpm face velocity, but that can be reliably achieved only with extremely good design and maintenance of the entire room in which the hood is placed. In my opinion, simply buying a hood that claims to demonstrate good containment at 60 fpm, without reference to the details of its intended location, is folly.

Peter Zavon, CIH
Penfield, NY

PZAVON**At_Symbol_Here**Rochester.rr.com


--
Allen Niemi, PhD
Director
Occupational Safety and Health Services
Room 322 Lakeshore Center
Michigan Technological University
Phone: 906-487-2118
Fax: 906-487-3048

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.