From: Don Abramowitz <dabramow**At_Symbol_Here**BRYNMAWR.EDU>
Subject: Re: [DCHAS-L] Eco Funnels for Lab Waste accumulation bottles
Date: Wed, 14 Oct 2015 09:51:22 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 1721665017.31024997.1444830682701.JavaMail.root**At_Symbol_Here**zimbra-mailbox
In-Reply-To <0D26E5F3-96AD-4F44-870A-2067B7A780A7**At_Symbol_Here**chem.chem.rochester.edu>


Brilliant solution.

        Don


We had the same problem with the older style when used in our undergraduate labs so I bought large polyethylene balls, cut them in half, and then glued the "domes" into the covers of the funnel.

Ken


On Oct 13, 2015, at 3:04 PM, Kennedy, Sheila <s1kennedy**At_Symbol_Here**UCSD.EDU> wrote:

Are we the only ones who had trouble implementing the Eco funnels?
 
They seemed like SUCH a good idea! We bought them years ago when they were new - all translucent white with a hollow space in the top of the lid. Students routinely walked up to them, ignored all colors and signs we could think of & poured their waste into the hollow in the lid. The lid held about 200 - 300 mL, maybe. The staff would receive a message that the waste bottle was full.
It was such a tricky =E2=80" and often repeated - task to lift the funnel off the bottle, pour the waste into another container, rinse the waste into the correct waste container... that we gave up.
 
The lids are now red and flat (no hollow), so others must have reported something similar.
_________________________________
Sheila M. Kennedy, C.H.O.
Safety Coordinator | CHEM Teaching Laboratories
Chemistry & Biochemistry | University of California, San Diego
9500 Gilman Dr. | La Jolla, CA  92093-0303
Office: (858) 534 - 0221
 
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu] On Behalf Of Lee Latimer
Sent: Tuesday, October 13, 2015 11:18 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Lab Waste accumulation bottle preference
 

Our lab outfitted (with local health authority encouragement) the standard 4L solvent/acid bottles with a screw on adapter intended to fit 4L bottles.   The adapter is available commercially in white plastic with a red hinged lid that offered the advantages of wide-mouth and mesh  cover of the narrow mouth to catch stir bars and debris.  These were a must in our labs even in hoods to control vapors.  They worked quite well though the whiny  lab members would prop the lids open for their personal convenience, being basically lazy and not really with the program.

The adapters are commonly available but I don't remember the supplier.

Lee
 


On 10/13/15,

I love Eco Funnel systems.  They are EPA compliant and the strainer catches magnets  We collect in these and transfer to others to discard.  They are not cheap, but are definitely worth it.  However, that being said, safety coated bottles are not cheap either.  Usually, you can find the product you want at the link below and order it through VWR (may have to have your rep quote a price) and it will be cheaper than Lab Safety.  Lab Safety has been very good about sending us replacement parts for the clasps, which will fail eventually.

http://www.calpaclab.com/eco-funnels/

As for narrow mouth containers, I do not see any advantage to those.  I prefer wide mouth, safety coated bottles.  All of our bottles are recycled 2.5 or 4 L solvent or acid bottles.  Anything that comes through the stockroom empty has all manufacturers labels removed, is rinsed with an appropriate solvent (added to waste), and thoroughly washed and allowed to air dry (no lid in storage).  I only use plastic bottles for nitric acid waste - a lesson learned.

S-

Samuella B. Sigmann, NRCC-CHO
Senior Lecturer/Safety Committee Chair/Director of Stockroom
A. R. Smith Department of Chemistry
Appalachian State University
525 Rivers Street
Boone, NC   28608
Phone: 828 262 2755
Fax: 828 262 6558

 

-----  Original Message ----- 
 
From:  Stuart, Ralph <mailto:Ralph.Stuart**At_Symbol_Here**KEENE.EDU>  
 
To:  DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU  
 
Sent:  Tuesday, October 13, 2015 8:00 AM
 
Subject:  [DCHAS-L] Lab Waste accumulation bottle preference
 

I'm getting ready to order some waste accumulation bottles for  our laboratories and wonder if there is a practical reason to have narrow  mouth bottles rather than wide mouth bottles. It seems like the wide mouth  bottles would eliminate the need for a funnel during the filling process and  lead to less exterior contamination of the waste bottle. However, standard  practice appears to be narrow mouth bottles and I wonder if this is due to a  specific practical reason or inertia?

Thanks for any thoughts on  this.

- Ralph


Ralph Stuart, CIH, CCHO
Chemical Hygiene  Officer
Keene State College

ralph.stuart**At_Symbol_Here**keene.edu



Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.