About This Archive  | DCHAS-L 2015 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: Re: [DCHAS-L] Glassware inspection guide?
Date: Wednesday, September 2, 2015 5:36:23 PM
Author: "Romano, Joe P" <JRomano**At_Symbol_Here**BEAUTYAVENUES.COM> 		Next by Date:
Subject: Re: [DCHAS-L] Glassware inspection guide?
Date: Thu, 3 Sep 2015 13:11:02 +0000
Author: Bret Mayo

From: "Stuart, Ralph" <Ralph.Stuart**At_Symbol_Here**keene.edu>
Subject: Re: [DCHAS-L] Glassware inspection guide?
Date: Thu, 3 Sep 2015 12:25:15 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 1EC810B8-B07C-494B-B12F-31E7CA7EEC8A**At_Symbol_Here**keene.edu
In-Reply-To


> >Stuff that needs more careful attention is anything that will be subjected to vacuum or pressure.

Thanks for this information. The procedure I?m looking today at involves temperature considerations. Because the reaction in the glassware is significantly exothermic, so it will be contained in the ice bath. Are temperature stresses likely to be of concern for lab glassware without visible chips or cracks?

- Ralph

Ralph Stuart, CIH, CCHO
Chemical Hygiene Officer
Keene State College

ralph.stuart**At_Symbol_Here**keene.edu

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.