From: "Stuart, Ralph" <Ralph.Stuart**At_Symbol_Here**keene.edu>
Subject: Re: [DCHAS-L] Fume hood face velocities
Date: Tue, 30 Jun 2015 16:45:28 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: D0705B97-132E-4AA4-8C9F-B4D8953E130E**At_Symbol_Here**keene.edu
In-Reply-To


> These velocities exceed 200 f/m in some cases.

I found many of our hoods were over 140 fpm; the good news is that the labor costs associated with getting them recommissioned to the design velocity (80 fpm) is easily paid for by the energy savings previously mentioned (and then some).

- Ralph

Ralph Stuart, CIH, CCHO
Chemical Hygiene Officer
Keene State College

ralph.stuart**At_Symbol_Here**keene.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.