From: Julie and Rob McLachlan <mclachlanrj**At_Symbol_Here**SYMPATICO.CA>
Subject: Re: [DCHAS-L] Options to replace oil baths for heating
Date: Tue, 12 May 2015 23:59:14 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: COL126-W43CBAA2278AA22FE219A53C2DA0**At_Symbol_Here**phx.gbl
In-Reply-To


We used =3Bboth the lab armor beads and the aluminum heating blocks with great success. =3B =3BMuch safer =3Band cleaner than oil baths.
 =3B
It is more expensive though...
Julie
 =3B

Date: Tue, 12 May 2015 20:20:21 +0000
From: sonja.ringen**At_Symbol_Here**NIST.GOV
Subject: Re: [DCHAS-L] Options to replace oil baths for heating
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU

Hi, Debbie,

 =3B

I picked up a little packet of metal beads at the Denver ACS meeting in March that provide a good substitute for oil or water. =3B They are called Lab Armor Beads ™, =3B and produced by a company of the same name. =3B They provide either heat or cooling and eliminate the problems of bacteria, mold, algae, and flammability. =3B Plus, they provide energy efficiency.

 =3B

Their web site is www.labarmor.com, and their phone number is 1-888-227-1410. =3B

 =3B

It sounded like a great idea to me.

 =3B

Sonja G. Ringen

Occupational Health and Safety Specialist

National Institute of Standards and Technology

325 Broadway, MC 173.02

Boulder, CO =3B 80305-3337

 =3B

Office: 303-497-7389

Cell: =3B 303-961-9251

 =3B

 =3B

 =3B

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Debbie M. Decker
Sent: Tuesday, May 12, 2015 9:51 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Options to replace oil baths for heating

 =3B

Good morning:

 =3B

I need to offer some options to replace oil (silicone or mineral) with a different material for heating baths. =3B I'm also looking at heating block options and have a number of suppliers to review - cost may be an issue here.

 =3B

Ideas? =3B  =3BThe Google has failed me this morning.

 =3B

Best,

 =3B

Debbie M. Decker, CCHO, ACS Fellow

Safety Manager

Department of Chemistry

University of California, Davis

122 Chemistry

1 Shields Ave.

Davis, CA =3B 95616

(530)754-7964

(530)304-6728

dmdecker**At_Symbol_Here**ucdavis.edu

 =3B

Birkett's hypothesis: "Any chemical reaction

that proceeds smoothly under normal conditions,

can proceed violently in the presence of an idiot."

 =3B

 =3B

 =3B

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.