From: NEAL LANGERMAN <neal**At_Symbol_Here**chemical-safety.com>
Subject: Re: [DCHAS-L] what to do - gas cylinder safety
Date: Wed, 22 Apr 2015 10:18:08 -0700
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 00c201d07d20$508b8250$f1a286f0$**At_Symbol_Here**chemical-safety.com
In-Reply-To


Let me play "devil's advocate" here -

What is really wrong with the picture?

 

It is different from what you advocate or expect.

The nitrogen was needed for some process. The cylinders were secured from both theft and falling over.

Cylinder to be moved had the valve protected.

Rather than kick roll or carry, the workers rolled the cylinder along the ground - zero gravitational energy to come into play; perhaps a back injury issue from bending over, but less than from carrying

It sounds like 2 of them the manual lift.

 

So, where is the safety problem?

 

By the way, cylinder nitrogen is a gas, not a liquid so laying the cylinder on the side is NOT a hazard. In fact, it is a common practice in some industrial settings.

 

 

 

------------------------------------------------------------------------------------

The information contained in this message is privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

 

ACSafety has a new address:

NEAL LANGERMAN, Ph.D.

ADVANCED CHEMICAL SAFETY, Inc.

PO Box 152329

SAN DIEGO CA 92195

011(619) 990-4908 (phone, 24/7)

www.chemical-safety.com

 

We no longer support FAX.

 

 Please contact me before sending any packages or courier delivery.  The address for those items is:

5340 Caminito Cachorro

San Diego CA 92105

 

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Harry J. Elston
Sent: Tuesday, April 21, 2015 8:16 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] what to do - gas cylinder safety

 

"Not a recommended practice."  Likewise, I am not surprised.

 

Harry

 

On Tue, Apr 21, 2015 at 5:41 PM, Leslie Coop <lcoop**At_Symbol_Here**willamette.edu> wrote:

A company doing work on campus chained thee nitrogen compressed gas cylinders to a tree in front of a dormitory. And left them there, for several days. Two were capped, but one of them had a regulator attached, with tubing going into a hole in the ground.

 

One day, two of this company's employees were seen removing one of the cylinders from the tree (one with a cap). They lay in cylinder on its side on the ground, rolled it with their feet to the curb, then rolled it off the curb and into the street to their truck. There, they picked it up by hand and manually lifted it into their truck.

 

Comments?

--

Leslie Coop, MS, CCHO, CHMM

Chemical Hygiene Officer/ Stockroom Manager

Willamette University - 900 State Str - Salem, Oregon 97301



 

--

+++++++
Harry J. Elston, Ph.D., CIH
Principal
Company Information
Google+
Twitter: **At_Symbol_Here**MidwestChemSafe

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.