Mercury 0.2 mg/L (200 ug/L) or more: RCRA-regulated hazardous waste
Mercury 1 ug/L or more (local discharge limitation): no discharge to sewer
Mercury between 1 ug/L and 200 ug/L: No drain disposal, so collect waste and ship out as non-regulated waste.
Note that local sewer discharge standards may vary by location, so check with your local sewer authority.
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU]
On Behalf Of Ernie Lippert
Sent: Thursday, March 5, 2015 10:56 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Mercury in laboratory effluent
The ASTM method D1252-88, Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water is used as the basis of determining the COD for other materials, not just [waste] water. This procedure specifies the
use of 1 gm of mecuric sulfate per sample to minimize the effect of chloride ions which may be present. The waste from such determinations contains considerable mercury. There are likely to be other procedures in which mercury is used. How do academic and
commercial labs economically handle such waste that consists mostly of water containing Hg and a few other less regulated contaminants? I believe the current allowable level for discharge is 1.0 ppb Hg.
Regards,
Ernest Lippert
Previous post | Top of Page | Next post