From: Russell Vernon <russell.vernon**At_Symbol_Here**ucr.edu>
Subject: Re: [DCHAS-L] GHS and NFPA query
Date: Sun, 19 Oct 2014 06:08:42 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: F7C61C79-EFB4-4A6E-9BA3-490180E21490**At_Symbol_Here**ucr.edu
In-Reply-To


Nicely written

Russell Vernon, Ph.D.
Director, Environmental Health & Safety
University of California Riverside
Riverside, CA 92521
russell.vernon**At_Symbol_Here**ucr.edu
www.ehs.ucr.edu
Direct 951-827-5119
Admin 951-827-5528
Emerg 951-827-5222

On Oct 18, 2014, at 3:51 PM, Shoshenskiy, Nicole <nshoshenskiy**At_Symbol_Here**MSDSONLINE.COM> wrote:

I love this thread.  Thanks for starting it!  There has been much confusion over keeping NFPA and HMIS with the new GHS labeling system..  This topic is of particular interest to me as a hazard communicator in balancing the differing systems in two arenas, Safety Data Sheets and labeling.

It is worth noting that HMIS and NFPA are industry organizations and not competent authorities in the true regulatory sense.  Further, that their respective systems serve different purposes, primarily for Emergency Response and crafted with their specific industries in mind and so not all aspects of chemical hygiene and safety are encompassed in their guidance systems, as a prior poster noted.  In my humble opinion, best chemical hygiene practices in a non-emergency response situation, the OSHA guidance should prevail. 

NFPA will only convey the hazards of the material as it is would be in a fire or spill situation and therefore inadequate for sole labeling in a non-emergency situation especially considering the newest classification schema under GHS.  The GHS workplace label under OSHA would offer the most coverage in my opinion and should they conflict in messaging, they should be not only delineated but a training issue addressed with all expediency should you choose to retain both systems.

Best,

Nicole Shoshenskiy
Authoring Team Lead
MSDSonline


Secretary, ACS, Chicago Chapter



From: Jim <jchem56**At_Symbol_Here**AOL.COM>
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Date: Saturday, October 18, 2014 at 11:47 AM
To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Subject: Re: [DCHAS-L] GHS and NFPA query

I agree with your statement making sure lab staff understanding what chemicals they dealing with suggestions; but include the staff that transport the chemicals within the organization and/or agency. As a precautionary procedure, I rather have laboratory personnel supervised location storage when non-lab personnel move or store chemical shipments.




Jimmie Julion, MSPH


-----Original Message-----
From: Eric Clark <erclark**At_Symbol_Here**PH.LACOUNTY.GOV>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sent: Fri, Oct 17, 2014 1:38 pm
Subject: Re: [DCHAS-L] GHS and NFPA query

The NFPA or HMIS labels, or something from another "competent authority" are for workplace containers you transfer chemicals to.  But you're right, you don't need that if you're using the original distributor's labeling. 
 
In my opinion the NFPA and HMIS labels are basically a courtesy for fire fighters.    
 
One problem with just using those pictogram placards is you still have to be careful about the corrosives, because it doesn't distinguish between acids and bases - or even that DOT quarter-inch steel corrosive definition that has nothing to do with pH.  So if somebody's not careful and sorts chemicals solely based on the pictograms, they just might put all the acids and bases in the same cabinet.  So you have to make sure everybody in the lab understands that, and exactly what those chemicals are that they're dealing with. 
 
Eric
 
Eric Clark, MS, CHMM, CCHO
Safety Officer, Public Health Scientist III
Los Angeles County Public Health Laboratory
 
 
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of George D. McCallion
Sent: Friday, October 17, 2014 8:13 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] GHS and NFPA query
 
Dear DCHAS members,
It seems that from the attached OSHA HazComm info,
The NFPA labeling might no longer be required. From a Hazardous Materials Technician level (completing this in Oct.) I would use that placard as fist line if identification. Any ideas as to why it might not be required?
 
Thank you in advance.
 
Sincerely,
George
 
*******************************************************
George D. McCallion
124 Magnolia Court
Collegeville, PA 19426
 
*******************************************************

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.