From: Brandon S. Chance <bchance**At_Symbol_Here**PRINCETON.EDU>
Subject: [DCHAS-L] House vacuum systems - traps
Date: Tue, 14 Oct 2014 20:26:11 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: D062FF20.2F9C5%bchance**At_Symbol_Here**exchange.princeton.edu


Dear DCHAS,

Are any of you running building traps on your house vacuum systems?  I know standard procedures require lab users to use traps when tapping into the system, but I am curious if any of you have went a step further and installed traps within your mechanical spaces that house the vacuum pumps.  If so, could you please provide me additional information on the traps you are using.

Regards,



Brandon S. Chance, M.S., CCHO

Program Manager, Chemical Safety

Environmental Health and Safety

Princeton University

262 Alexander Street

Princeton, NJ 08540

609-258-7882 (office)

609-955-1289 (mobile)

609-258-1804 (fax)


"… our job in safety is to make the task happen, SAFELY; not to interfere with the work…" Neal Langerman

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.